Townsend SuperCelebration What parts are you bringing/need thread?

[77BRONKOTN]

2011 Super Celebration April 14-16 Townsend Tn.

Didn't see a thread on this yet for this year. If so please merge this one.

I NEED

Pre-Runner of sorts front bumper

Rubber J shift boot

16 inch wheels 3.50 BS

 

[monkeylovetrees]

i,m travelin 15 hours from rhode island my ride is not long road worthy so i,m taking the trip in my wifes car first time at this show

 

[n59rob]

cargo area steel floor

I will be at the Townsend show. I need the steel floor for the cargo area. Let me know if someone will have one and what the cost will be.

Thanks!
Robert

 

[Ratch]

I am gonna have some explorer parts available. GT40P heads, serp set up and I have a small block bell housing C6 out of an early 80's 4x4 F150 with or without the aluminum chain drive transfer case. Can bring them to Townsend, pm me for details. I was gonna post them in the for sale section this weekend. I am out of town till Thursday evening and the internet at the hotel sux, so I might not get back to you before then .

 

[Scoop]

Finished my efi conversion so I have the following parts for a 289/302 I can deliver to Townsend:

Pertonix Billit Distributor
Pertonix Flamethrower Coil
Factory Ford Aluminum 2-BBL Intake Manifold
(2) 2100 Carbs (need rebuilt)

About 10K miles on the Pertronix stuff. PM me with offers or to get prices.

 

[SpareParts]

I will have just done my EFI swap, so I'll have a Edelbrock 351 performer intake and 600 cfm carb with manual choke, 2150 carb with elec. choke, 351w dist. for duraspark, along with a bunch of 1/2 ton full size parts from various years of trucks and broncos.

I won't bother bringing any of it with me unless someone is interested in something.

David

 

[phred]

Lets see;
front fenders not perfect but repairable, front stock bumper, stock tire carrier and hardware, 302 points dizzy, 78 bronco tube grille, f250 master cylinder, 78 bronco alum radiator, d44 axle truss, 2 rancho front shocks, stock 78 bronco chrome rear bumper, q-jet carb, stock 78 bronco ps pump, 74 bronco draglink, 78 bronco power brake booster and brackets, boxes of little parts.

I've got a good np435 that I will bring if someone wants it. Otherwise that heavy thing is going to stay in the shop.

 

[77BRONKOTN]

Bump TTT

 

[n59rob]

Parts for C-4 swap

I need the parts for a swap to the C-4 for a 72. Complete flywheel to TC. Let me know what you have that we might get together in Townsend. I can bring the straight shift three speed, clutch, flywheel, bell housing, adapter, and Hurst floor shift for trade or sale if someone is interested.

Thanks,
Robert

 

[abe_froman]

I've got a Parts Wanted link in my sig. I'll probably still be looking for various interior trim pieces.

 

[Ratch]

I forgot I have a upper/lower explorer intake available. Hopefully have some more stuff coming in this weekend.

If anyone has a t-shift D20 they would like to trade we can work something out.

 

[wwgx90]

I will have front and rear tube bumpers that are new - never installed. These bumpers were made by Jason, here on CB, and are excellent quality. They were going on another project that I no longer have and are now available. Both bumpers are in primer. I will have them at the show so you can see the quality. Also have 1 15 x 8 and 1 15 x 10 White spoked wheels new - never installed, make offer - these are going to go. Both bumpers are sold.

 

[L&D's Broncos]

"I NEED

Pre-Runner of sorts front bumper

Rubber J shift boot

16 inch wheels 3.50 BS[/QUOTE]"


Are the wheels you are looking for off-road only or street-mild off road?
I have 5 NEW Center-Lines I bought several years ago for a project that I ended up selling. They look like a Cragar SST solid backs polished 2- 16X10 and 3- 16X8 ( 1 spare )
They will fit disc or drum brake front. All 5 new in box with center caps.

Also is anyone interested in a 66' rear seat in gray with the pony emblems and gray arm rests?

 

[ransil]

Logans Metal Products will be offering free shipping to the event.
Order must be placed by April 1st 2011

http://logansmetalproducts.com/

 

[gbbronco]

I have a 5.0 efi I was going to install but change ,set of smiths built bumpers

 

[ransil]

I have:


Passengers rear door post $60

Scott drake striker new in package $10

1 Slot wheel - polished 15x8 BS ?? has the tapered lug seats $100

2 Carbs 2bdl $5.00 ea ( little something for the effort)

Drive slugs & caps from a stock ford or chevy D44 $30

5.0L Ford motorsports AC eliminator bracket ( bolts missing) $10
http://www.summitracing.com/parts/FMS-M-8511-A50/

Headers 90-94 5.0L Truck summit or pacesetter brand new $125

Stock overflow bottle $10

Stock 302 points distributor looks nice- $10

Stock Power steering pump & cast bracket $25

Doors - have a few of each all need repair on the bottom some have chrome trim $50 ea

see my ad in the classifieds for more parts, it easier to keep track over there.

http://classicbroncos.com/forums/showthread.php?t=181064

This is delivery only to the super celibration

Payment up front get them packed for the trip..

 

[BLAZEOFGLORY]

Parts I'm bringing

Black sun visors with brackets

Headlite rings alittle rusting

1 remote mirror fair

1 nice side mirror

Front turn lens 3 amber 1 clear

2 red side marker lites

1 set of rear reflectors no chrome trim

windshield washer tank

4 chrome side marker bezels

9 new dash knobs the clear has turned alittle yellow w/set screws

1 stock wiper bracket

1 drop wiper bracket

2 speedo heads

1 set of heavy duty light switches

302 alum. Edelbrock proformer intake with gaskets and arp bolts

1 set stock door glasses

Front drum brakes for dana 44

Leather cooking or work aprons

Decals

Also have some stock 15" wheels
If your coming and interested in anything let me know. THANK YOU Jeff

ps I can send pics of this stuff by email Again THANKS

 

[77BRONKOTN]

Just remembered I have these to bring if someone is interested.

Stock rear bumper needs TLC.
Rear fender oversized cutouts from a 66 F100 same looking uncut style if your going back to luber.

Make some kind of offer, a soda,beer,cup of java?


Duffs receiver hitch new $100. Bolts into frame 66-77. 3500lbs 300 tounge. I bought their heavy bumper with built in hitch.

 

[kb6677]

Can deliver parts from a '77Explorer

I guess this is ok-parts available for Townsend delivery.

http://classicbroncos.com/forums/showthread.php?p=1785106#post1785106

 

[thumping]

We (Stone Crusher) will have a booth set-up and will have stock systems available both drum and disc along with radius arm extensions and steering box girdles.

In the used parts I’ll also have a
A complete drum EB 44 with 4.10 gears
Stock fan shroud
Miscellaneous parts as in some door handles and so forth
A decent ‘66 grill
78/79 brake booster and master cylinder
78/79 rear seat
78/79 straight shift steering column…non tilt along with dash instrument cluster.
Tube doors for 78/79
Can bring a decent 78/79 tan top if anyone is interested….dirt cheap.