AR OCBR - Buy, Sell, Swap Official Thread

[sprdv1]

Aiiight, upon request by the OCBR Peeps, Please post anything you may want to sell, swap, trade, give away at OCBR in Sept this year.

GO, go, GO!!!!!!!!

 

[BajaFresh75]

Marco?????

 

[Prizefighter]

I'll play along!!

Dana 60 from 2005 Super Duty $600

James Duff coil buckets for full width axles, NIB $125

351/400M power steering bracket for Saginaw pump NIB $100

Sterling 10.25 rear axle $150

Grizzly 31 spline mini spool with chrome moly pin NIB $25

I take paypal, send me a message! Willing to trade and take obo on some parts.

 

[lilthom]

I will have a truck bed full of odds and ends as usual along with:
a freshly built C4 with adaptor, $650 SOLD!
a set of one tons from 1995 F350. I have already done the hard part of shaving all the perches and brackets in preparation for linking them, $900.
New in box PSC full hydro kit, $950

LAST CHANCE ON THE ONE TONS. I am not going to haul these down and back unless I have a buyer.

 

[okie4570]

I look forward to this thread every year

 

[cougarmandan]

Polo!

Did you know that you have to post 8 characters? Guess I never ran into that before.

 

[simmsjeremy]

Noob question but what is OCBR?

 

[74 Explorer]

Oklahoma Classic Bronco Roundup
Actually takes place in Hot Springs Ar.

Hot Springs Offroad Park.
This will be my 6th year to go, it's a good time and great people!
There are usually over 130 broncos, from stock to totally custom.
This year should be even better since it's the 50th anniversary!

Link to the registration and event page.

http://www.okclassicbroncos.net/

 

[simmsjeremy]

Great info thanks

 

[sprdv1]

Great info thanks

You won't be disappointed

 

[Irishjig13]

These are all parts from my 74 build. Parts below are used, sold "as is" and buyer is responsible for shipping or local pickup. Price is negotiable, trades "may be" considered. Additional parts will be added in the near future as I replace them during the build process. Currently the motor and brakes are still in the truck but will be removed in the near future.

New Lower Prices: (7/10/16)
1. Used - Plastic Aux Fuel Tank and Serviceable Straps. $50
2. Used - Radius Arms. $75
3. Used - Stock Coil Springs. $40
4. Used - Stock Leaf Springs. $50
5. Used - Stock Track Bar with good bushings $50
6. Used - Four White Spoke Wheels with Tires. The tires are better than 80%, wheels need powder coat or are great for off road. $500
7. Parchment seats in B- condition "as is" $600 for the set.
7a. Seats above with materials to cover as described below $1000
8. Above seats refurbished with black covers, new foam, arm rest covers (bench), hinge covers, chrome hardware $1100 for the set.
9. Stock running 302 complete, believed to be original, approx. 85k - (still in truck till early August removal) $600
10. Bolt on Reese class IV hitch $75
11. Complete Dana 44 front drum brake assembly, master cylinder $50(on truck)
12. Front and rear stock bumper, decent condition $100 pair
13. Complete stock 302 2Bbl ~85K miles runs good starts right up, upgrading to a 351W 400hp.

Photos can be seen via the link below. Photos of the truck are for reference for the bumpers and hitch. There are 82 photos at this link. If you don't see them all, please feel free to contact me.

https://1drv.ms/a/s!Atiu7DKE6suvjiBfp7lNGt4AIJTc

I can also send photos via text or email if preferred. You can email me direct at kevinburns13@hotmail.com

 

[SpareParts]

I have a bunch of outer stub shafts for D44's.

 

[JWMcCrary]

MSD Pro-billet TFI distributor for 351W - Part# 8453
Was installed but never ran, other than that it's brand new. I took the MSD TFI module off of it to run a remote module but the module is included and is new.

$175 (Price from Summit is $326.95)

 

[JWMcCrary]

Accel TFI ignition module and McCully Racing TFI relocation mount and harness. Module is new and was installed on the McCully mount with the heat shield goop. All parts are new. Was mounted but taken back off.

$75 for the ignition module and relocation mount

TFI coil connector - $10

 

[JWMcCrary]

Spectre dual intake air cleaner. It's about year old, still in excellent shape, filters are still good but not as clean as shown in the pics. It came with some pieces that would extend the filters all the way to the grill which go with it. As it sits it put the filters right behind the openings in my hood. It was over $200+ new. Will let it go for $125. Fits standard 4 barrel type carb or throttle body.

***SOLD***

 

[JWMcCrary]

Barry Grant Speed Demon 750, dual feed, vacuum secondary. Dual feed fuel line connector shown in pic comes with it. Installed and ran for less than 2 days. Works great on the street, sucks offroad. New ones today run from $500 up to $650.

$375 or best reasonable offer

 

[JWMcCrary]

Set of D44 knuckles, pre 76 (6 bolts for spindles) that have been drilled for heim steering (3/4). Will need new ball joints.

$40

 

[fordguy]

will this work with the one ton gm tie rod ends?

 

[gbrew]

Hood?

Anyone got a hood in good condition they would like to sell at OCBR? I've got a 77 in need. Thanks, GB

 

[SpareParts]

fordguy, JW's knuckles will not work with GM tie rods. They will have a 3/4" hole drilled through for a normal bolt.