Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Hello all bronco folk. I am about to purchase a 74 that comes with an extra 4sp toploader but the guy tells me i'll need a t-case mod? any advice? i am a newbie with no fear of getting all greasy!!
You'll need the output shaft conversion from Advance Adapters and you'll need to do some machining to the original trans to D20 adapter for your bronco to fit the larger output bearing on top-loader. Next woul be to get the shifter kit from Duffs.