- Joined
- May 6, 2015
- Messages
- 143
I couldn't help but throw these big tires on an uncut bronco. I have 17x7 wheels with 4.5 inches of backspacing on 285/70/17s with a 2 inch BL and 2.5 inch SL with a little extra in the rear measuring around 3 inches total (see image). The rear axle was moved back an inch by Kincer since the chassis is through them. The wheels are barely rubbing so I don't need much. Thoughts? Thank you!
Attachments
-
IMG_2169.JPG113.4 KB · Views: 160
-
IMG_2162.JPG102.2 KB · Views: 164
-
IMG_2164.JPG142.5 KB · Views: 154
-
IMG_2165.JPG167.5 KB · Views: 148
-
IMG_2161.JPG82.4 KB · Views: 185
-
IMG_2160.JPG158.2 KB · Views: 185
-
IMG_2163.JPG157 KB · Views: 179
-
IMG_2167.JPG125.7 KB · Views: 145
-
IMG_2166.JPG183.5 KB · Views: 132
-
IMG_2168.JPG110.5 KB · Views: 163