Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
Yeller

Yeller

Contributor
Bronco Guru From Rogers County Oklahoma
Joined
Last seen
Messages
6,033
Article comments
1
Garage items
1
Garage comments
1

Latest activity Postings Attachments Images Garage items About

    • Yeller
      Yeller replied to the thread New products from Solo Motorsports.
      Leaf springs work when set up properly, I'm really digging the bypasses in there, I've been saying for several years I need to build...
    • Yeller
      Yeller reacted to Solo Motorsports's post in the thread New products from Solo Motorsports with Like Like.
      https://www.dropbox.com/scl/fo/voqljl0ar1amvuviyxorb/AJfLUbJ5e6NkvgYbTCPQQ5w?rlkey=b13v7218jdhiamnjyquvpf4e7&st=dx56vj77&dl=0 Here is...
    • Yeller
      Yeller reacted to Solo Motorsports's post in the thread New products from Solo Motorsports with Like Like.
      We have a video of the Latch in action on our Instagram. We posted it on October 23, 2023. We are trying to post more on YouTube for...
    • Yeller
      Yeller replied to the thread Moab help.
      If he’s brave, hells revenge, easily doable in a stock toy pickup but needs experience or some good help to not get into trouble, not a...
    • Yeller
      Yeller reacted to Ether's post in the thread 1970 1/2 cab build "phase 2" with Like Like.
      Well, turns out a 1” body lift = big tunnel cut. We’ll make it pretty with a nice cover. Now to build and cross member and get this...
    • Yeller
      Yeller replied to the thread How to adjust positive camber.
      Air pressure and tire width play factors as well. A wider tire tends to follow ruts more and air pressure can have an amazing amount of...
    • Yeller
      Yeller replied to the thread How to adjust positive camber.
      I think at that level is acceptable with a 35 but it may be because I think it’s normal. I’d chase more castor to improve tracking.
    • Yeller
      Yeller replied to the thread Pilgrim's Progress.
      Awe shucks Howard, your gunna make me blush. I just got a lot of stuff crammed in the ol noggin and when it starts spilling it just...
    • Yeller
      Yeller reacted to Howard2x4x4's post in the thread Pilgrim's Progress with Haha Haha.
      Rodgers, could well be so! Could also well be that it's making them dizzy. Maybe even nauseous....
    • Yeller
      Yeller reacted to stout22's post in the thread Pilgrim's Progress with Like Like.
      Howard, I think you're going in so many directions that the squirrels are in awe. "look it's Howard!"
    • Yeller
      Yeller replied to the thread Beadlock Slots.
      That is the Ansen wheel that American Racing produced for a few years. Unfortunately they are now dodo birds and unicorns, your only...
    • Yeller
      Yeller replied to the thread How to adjust positive camber.
      As confirmed by others 1-2 degrees is correct. This is my opinion on the camber helping. I believe it keeps more pressure on the...
    • Yeller
      Yeller replied to the thread Pilgrim's Progress.
      Howard, those are the bearing retainers. The Set20 bearing uses differential oil for lubrication so there is no seal in the axle tube so...
    • Yeller
      Yeller replied to the thread How to adjust positive camber.
      The positive camber is part of the original alignment spec, like mentioned above along with get an alignment and print out of the final...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top