Mike Hewett
Sr. Member
- Joined
- Mar 1, 2004
- Messages
- 358
Ok here is the deal, I ordered a rebuild kit from JBG and am having problems. The bearing that I pressed on to the front output shaft fits fine on the shaft, but the cup for that bearing won't fit in the hole designed for it in the t-case because it's to small. AND on the other side of that same shaft, the bearing that should go there is a sloppy fit, but once again the cup is the right size for the case. Somebody else had this experience???, this is one of those things that really chaps my ass.:'( :'( ?:? :-X