Tools & Garage

Tech article by Marlon Allen (NOTPRETTY) The heat exchanger: I found this at a refrigeration supply store. It is called a ½ ton coaxial coil exchanger. It is a tube in tube design and is very affective. In fact, it may be too good. The water coming out of my showerhead is pushing 112 degrees...

Tech article by Richard Burris (ricks77eb) Adapted from a post by Craig Kepner. Photos used with permission. I guess you could call this a Junkyard Tig Welder. The idea is you can mount a regular Ford 130 amp 3G style alternator on to your air compressor (or similar motor) so that you can use...

Tech article by Malcolm Beattie (malcolmzilla) This rotisserie will fit a early Bronco body (66-77, no frame), with the front clip (inner fenders, etc.) removed. It will allow for easier access to the underside of the tub for blasting, patching and painting. With the addition of casters, it...

Tech article by 70_Steve Several years ago, I installed a 2 ½” suspension lift on my mostly stock '70 Bronco. The lift turned out very well, and I was very pleased with myself. It completely changed the way my Bronco looked, and I was proud to drive it down the street. So proud, in fact, that...