- Dash & Guages

Tech article by eds66bronco After adding my front cage, I realized the glove box was going to need to be modified in order to be of any use. After searching all over the net and looking at all the mods that people have done, I was surprised at how complicated people had made this project...

Installing a front roll cage was actually quite a bit more complicated and thought intensive than simply fitting some pre-bent tubes together and welding them in place. It was all the work done to make room for the cage that took the most time. Clearance becomes a premium when deciding exactly...

Product Review by Jon Hanna (Admin) Having bought other items from Tuffy Security Products I knew I could expect their new 66-77 Bronco glove box to be heavy duty, and I certainly wasn't disappointed. Just like their consoles, the Bronco glove box is a solid 16 guage steel box with a tough...

Tech article by Dan Thomas (Jeepster) For those of you that want to refurbish your Stock Gauge cluster, or want to reset your odometer to reflect a motor rebuild or gauge swap. (Seeing as these Rigs are well over 25 years old, most states usually don't see mileage as an issue on sales and...

Tech article by Mike Henningsen (IowaMike) Since I had to ask several questions when I removed my dash, I'm sure there are others with some of the same issues; here's how I ended up doing it: This was the starting point, an intact dash. First thing to do would be get the W/S out of the...