RJM Fuel Injection Harnesses?

[SC74]

Does anybody know if the RJM harnesses are being sold under a different label now?

I've got one and would like a second one for a different project now.

 

[ScanmanSteven]

If the Ron Francis harnesses are still available they were based off the RJM harness.

 

[broncosbybart]

Got one from Toms. Going off of memory, it was identical to the RJM harness.

What are you working on Robert? Always good to see a project come together

 

[Toddpole]

Ron Francis bought RJM. They offer several harnesses for Early Broncos.
This is the MAF harness. https://www.ronfrancis.com/prodinfo.asp?number=TDZ-75

 

[Broncowalt]

Also available at Summit. Summit part number RFW-TDZ75.

 

[DirtDonk]

We sell it as well, with a few tweaks to it, in order to make it more "Franken-EFI" friendly.
http://www.wildhorses4x4.com/product/16931

Paul

 

[k13evin]

We sell it as well, with a few tweaks to it, in order to make it more "Franken-EFI" friendly.
http://www.wildhorses4x4.com/product/16931

Paul

Can that harness be used with a 88 mustang 5.0 running a explorer transmission?

 

[Viperwolf1]

Can that harness be used with a 88 mustang 5.0 running a explorer transmission?

You would need a separate controller and harness for the transmission.

 

[SC74]

What are you working on Robert? Always good to see a project come together

This is more for a friend of mine that is in a rush to get a Bronco that hasn't run in several years ready for Super Celebration. He also has used RJM and we were both scratching our heads where we could get another one for this project.


Thank you for all of the responses! I'm sure he will be buying one very soon!

 

[DirtDonk]

I believe (but could be wrong as I never heard this from Ryan) that Ron Francis was actually who was manufacturing the harnesses to RJM specs anyway. At least after the first few runs, if not all along.
So it was a pretty natural segué for them to start marketing it themselves when RJM closed the doors.

It's not like it's the only game in town of course, but the RJM/Ron Francis Bronco-specific harness is a pretty clean and clever setup.
We also sell our #5920 (http://www.wildhorses4x4.com/product/17568) which is a less expensive, sort of bare bones version. Fits the same engines, but is not fully pre-wrapped or laid out specifically the same as the RJM EB harness. But it has all the same functions for about $95 bucks less.

Paul