LUBR on 33's, pics?

[muskrat]

Would love to see any pics of LUBR's sitting on 33's. Ideally, ones that have the ability to articulate the suspension.

Who's got them to post?

Thanks.

 

[tasker]

going to the dark side Dave?

 

[muskrat]

going to the dark side Dave?

LOL! Maybe?

 

[.94 OR]

http://us.coopertire.com/Tires/Light-Truck/DISCOVERER-S-T-MAXX.aspx

These might be tall and narrow enough. Would have to run 17" rims though.

 

[JSmall]

http://us.coopertire.com/Tires/Light-Truck/DISCOVERER-S-T-MAXX.aspx

These might be tall and narrow enough. Would have to run 17" rims though.

I like those tires. I can't remember the exact size, but I think it was 255/80/17 wich is close to the 33x10.5's that I run now. I'm looking for a 17x8 wheel w/ 4.5" backspacing to run with them. I think that combo will clear the rear quarter.

Current combo - 2.5" suspension, 1" body, axle moved back 1", 15x6 wheel and 33x10.5 BFG's

 

[ncsubronc]

First pic is 33x10.50 KM1's on my old LUBR on stock rims.

Second pic is some old 32x8 bias mud tires on 16" Willys Jeep wheels

3.5" CAGE offroad lift in both pics

 

[.94 OR]

Sorry, I forgot to post the size.

I am thinking of the 255/80-17

I might try those on my F150 to get a little height without sacrificing the drag from the width.

 

[Kdub]

My project truck.
Has 285/70 R17 BFG's(aprox. 32"), 4.5 backspacing.
3.5 susp. lift. 1st pic- stock bushings, 2nd-1" body lift.

 

[Firedog67]

255/85/16 (33.3x10x16) KM2
3 1/2" rear sl, 2 1/2" front sl, and WH 1" body bushings

 

[ford man]

Nice looking bronco firedog67 what kind of wheels are those?

 

[JSmall]

Forgot the articulation piece. Was able to get 18" off the ground with one tire and no rubbing.

Looks good! I'm thinking the combo I want to run should work after seeing your pic.

 

[Thunder Chicken]

Firedog......nice luber man.....among the nicest I've seen

 

[DirtDonk]

There's another good pic in the "show your tires" thread on this page. Posted by 1sicbronconut you can either check it out, or advanced search for his posts and it should show up as one of the most recent.
Like the JSmall and Firedog pics, very stuffed indeed.

Paul

 

[nathan.hall1]

Mine has 33x10.5 I did have move the axle back an inch...Oh the lift is 2.5" from toms and it has a 1" body lift from WH

 

[NSG]

Check out Nicks Trix Brain Surge

 

[Beer and Fish]

Here's my LUBER on 33's

So, It's not finished yet.

 

[kjmssd]

Here are mine.

3" suspension - 2" body

15x10
5x5.5 Bolt Pattern
-50 offset
3.5" backspace

 

[mini73]

Here are mine.

3" suspension - 2" body

15x10
5x5.5 Bolt Pattern
-50 offset
3.5" backspace

Nice! I'm planning on doing mine like this and this is the look I am looking for. I want to keep mine uncut if at all possible. What size tires?

 

[1sicbronconut]

Here's a few the black wheeled pic's are the 33" x10.5" x15" and the one shot on silver wheel are the 255/80/17 BFG's. A question for the folks that build LUBERS with a wider tire/wheel combo do you just run a huge bump stop to keep the tire from hitting the rear quarters/wheel openings??

 

[muskrat]

Nice pics guys.

Educate me. How do you move the axel back that one inch? I can't visualize it without having the axel housing not resting on the apex ofnthe springs.