SOLD '76 Project Kentrol Fiberglass Body lots of pics

[5001craig]

I have two EB's and thought I would build this one to run well on the sand but I need to focus my energy and funds on my other one.

This '76 comes with a Kentrol fiberglass body. There is a 302 in it but it does not have an intake or carb (I have a stock 302 intake and 2 bbl carb that you can have). Also comes with power steering and a C4/Dana 20. Axles are there too. Condition of the mechanical parts is unknown (just being as up-front as I can--I've never taken them apart). I was going to take everything apart, inspect and repair/rebuild as needed--so this is a project. I love the fiberglass body, though and that was why I purchased this one.

The frame and axles were powdercoated by someone else some time ago. The powdercoating was not the best but I am sure it was good for the steel. The frame looks to be in good condition. The picture of the engine shows its current state (intake and heads are removed).

Also included is an Aero Enterprises fuel tank:

I have the title and also received some paperwork for this one like the hand-written build sheet, window sticker, warranty card, etc...

I have quite a few extra parts too. I will let some of these go with this '76 if I am not worked on the asking price. These parts are not for sale individually as I would like to keep them for my other EB. Here are some pics of the spare parts that I will negotiate on:

This '76 is presently located in Huntington, IN. I can be contacted via email at 5001craig@gmail[dot]com (preferably) or through this forum via PM.

 

[5001craig]

I've had some guys ask about the extra parts. My intention in this for sale thread was to let everyone know that I would include two or three of the large parts needed (parts like windshield, doors, liftgate and/or tailgate) in the deal if the price wasn't haggled on. You would get your choice of these parts you want as I have multiples of most of these. The smaller parts in the boxes I would need extra for.

Also, I have a running 302 that I've been using in my '74 that works fine. I've let a few guys know that I would include this engine in the deal for the asking price (as well as the above two or three larger parts). This engine is as far as I know a totally stock 302 with I believe a '69 4 bbl intake (that came off the motor in this for sale thread) and a new Edelbrock carb with manual choke that I installed last spring. I need the alternator and power steering pump and brackets. This motor is presently installed in my '74 and you can see it run if you would like. I plan to have this engine pulled within a month. I'm going 408W/C4/Atlas 3.0 over the winter.

Not sure if I mentioned this but the stock intake and 2 bbl carb off my 302 is included as well if you want it.

Thanks and happy Thanksgiving!

Craig

 

[5001craig]

This EB is sold. Thanks to the awesome buyer for a perfect transaction.