Search results

Any tricks to getting the oil pan off while engine is still in bronco. Its all unbolted but not enough room at front frame rail!!! Guessing i need to unbolt enging mounts . Thanks

My carb was leaking after shutting off the engine so i got a rebuild kit from napa took it all apart soaked it blew out all the holes reassembled. Cold starts now require alot of cranking and more than the usual 2 pumps of gas pedal. It runs great after it starts wondering if i missed a check...

I bought these from NAPA about a year ago they are too harsh riding for my road use only 1970 170ci 6 bronco 75 bucks is less than half of what i paid. Used for 200 miles or less

I have a 6-1/2 foot quick switch plow I took off my 1970 bronco with 170 cu in 6 cyl. The pump, frame, lights controls are all included, the skid shoes are missing and 4 of the mounting bolts broke on removal. This is a complete setup for the 66-77 bronco very little use I can email pics.

Fisher 6 and1/2 foot power angle plow. Includes frame lights and all mounting hardware. There are no skid shoes . I removed this from my 1970 6 cylinder bronco , all control cables included, very little use still has the fisher emblem on blade. 800.00

New crate 2.8 diesel now available 8999.00 including shipping any interest

6and a half foot fisher snowplow, I took it off my 1970 6 cyl this summer, it was not used alot , still has the fisher painted emblem on face of plow, comes with pump, controls, lights,mounting frame etc. you will need a couple of the mounting U-bolts, and the skid shoes are missing. $1,250...

So I took the head off to have an ear welded back on for exhaust bolt, put it all back together with a new Fellpro head gasket, adjusted the valves with the engine warmed up and running to .018 still makes alot of tapping noise. Should I tighten up to .014-.016 ? I am guessing they are solid...

170 CI six the aft ear the the exhaust manifold bolt threads into has broken, the bottom half is still there, has anyone had good luck with a weld repair then drilling and tapping. I pulled the head and plan to bring it to a machine shop tomorrow. I just don't want to do this twice. Found a...

I have a stock 1970 bronco that the rear brakes lock up way too soon I looked in the master cylinder and found the rear resavoir to be low is that for the front or rear brakes. Was thinking maybe the wheel cyl were leaking on the shoes . Thanks

I plowed my driveway with my 1971 and fisher 6 and a half foot quick switch. It did a great job on the 2 feet of snow we had. While I liked being inside with heat my driveway is too confined for a plow. I did take it very slow in 4wd low. So I am thinking of selling the plow setup question is...

What size tires can I put on my 1970 stock bronco. It has old bias plys and it's time for new thanks