Search results

how do i reclock a g3 alt. i got my rjm today after a 2 week wait and because the pic has the alt orinetated upside down and i did not notice, i now have a 4oclock and i need a 8 oclock. the batery cable stude has the boot tight to the block, that will burn off after the engine gets hot and...

I got a cetified letter today from a towing company in NV, they said they towed my bronco 14 years ago when it was in an accident while I was deployed over seas. Someone is trying to get a title for it now and needs me to signoff on a bill of sale and title certificate. edit** I am going to...

picking up some long arms soon and have a few questions for you that have them. duffs/cage style arms, how is the street driveability, how much body roll feeling do you get from the hemi joint on turns? i have the old style long tube headers, are the duffs/cage style arms going to hit them...

this is a quick paint job to change the color to freshen it up. body needs lots of work that im not going to do, so this is not a quality project. I will sand it and wipe it clean so the paint bonds, other then that no other prep work will be done. should i use rattle cans, if so what kind, do i...

my alternator is showing 10 volts coming out at the yellow wire (centech harness) this would explain why i had to put the battery on the charger. i noticed the volts guage was at 12 then 11 then 10 and still droping. it is doing its best to stay off the road and in the garage, i swear this truck...

2 seperate questions that i feel the answers are not going to be something I want to hear. Hydroboost needs a power steering pump that has 2 returns, my duffs saginaw pump only has 1 return, what pump would work here that will fit into my duffs pwstr kit? I suspect its going to cost more then I...

What power brake system works best? The big booster like on Toms kit http://www.tomsbroncoparts.com/product.php?category=115&id=497 or the little hydroboost like at Wildhorse http://www.wildhorses4x4.com/product/Basic_Hydroboost_System/Bronco_Power_Brakes I have efi and it needs to clear the...

I installed a BC efi tank and need to add a inline fuel filter. I have alum fuel line running from the tank to the engine bay where I have soft line to the fuel rail. I would like to just be able to cut the soft line and add a filter here. Anyone doing this and what fuel filter part # would I...

efi install done, now time to start it. i primed the fuel pumps, tried to start it, cranks but does not fire. donor parts were from a mass-air mustang. used my stock block. I ran self test and hooked up the fuel pressure gauge. guage shows about 1-2psi at the fuel rail pressure valve. i find no...

I have the RJM harness and my question is this. How do you get the 4.3/8" cpu plg to fit through a 3"x1.5" hole. I made a card board template of the hole and I can not get the cpu plug to make it through. So before I cut a hole in the firewall I would like to know the trick, seems to me it...

Hi Installing EFI and a few questions. I have a Centech harness installed. I added the RJM Harness for EFI. I am using the stock alternator. Can I remove the Regulator or do I need it for the alternator still? Can I remove the ballast from the old style coil since the RJM harness hooks up to...

What are the must have tools for working with and troubleshooting EFI? Please list what I am going to want to have when I install and start up the EFI, and a hotlink to the tool would be helpfull.

All off my 302 from my Bronco. Edelbrock Performer series 600 cfm carb W/elecrtic coke and offroad needle/seat. Edelbrock Performer series intake. Moroso chrome valve covers. Moroso air cleaner, 12" round, gold color. Fuel pump, mechincal. Coil. Distributor w/wires. Most parts have under 1000...

I have been installing my EFI from a 90 5.0 mustang( at least that is what I was told it came off of). The PCV valve that installs into the back of the intake manifold is the issue. It came with the PCV valve with grommet attached but not installed on the intake. The grommet is to loose and does...

just about have all my efi parts and ready to assemble. bought used ford mustang dizzy (89 I think) and i recall the dizzy gear was not the correct size, but i cant recall now. what size dizzy gear do I need and how do I tell what I have, count teeth? i have a 73, 302 with performer rpm cam...

test ...........................................

So i have most of my parts for EFI from a 90 mustang 5.0. I have the main engine harness and efi harness, and in the bronco is a new centech harness that in installed about 5 years ago. How do I tie the mustang harness into the centech harness? Do I need an additional fuse panel, I have been to...

Thanks for the eariler help with my EFI questions. I got most everything from a 90 or so mustang. I heard that the alternator needs to be higher amped then stock for the efi but i cant find anything that says what amp i need. My plan is to stick with stock style pully system from my 302 to keep...

what distributor would i use for my efi conversion? i have not had a chance to get over to the salvage yard, im packed solid for the days this weekend. i have a few minutes at the mooment. i know it may be gone buut i will get over as sson as i can. that is not the norm for me. i may have a...

Im going to start geting together everything for EFI. What should I expect to spend on this project $500, $1000, $2000? Im going to try going with EFI from a 88-95 mustang or simular setup. I have a 73, 302 that bore 30 over w/ edelbrock performer cam. Will the EFI CPU have issue on a non-stock...