Search results

Ok. So I have read that 78-79 Bronco brake cables are the way to go for a lifted Bronco. My bronco has 3.5" lift springs with a 1" body lift. The rear axle is a 77 F-150 rear axle. Do you recommend that I use both sides, or two that are the drivers side? Thank you for your help!

These seats came with a project Bronco years ago. They were reupholstered grey and have been sitting for at least 15 years I would guess. Sliders mounts included. They need a little bit of cleanup side plastic covers are cracked etc. Foam feels nice. They are a little stinky from sitting in a...

I have done a body off build on a couple of vehicles including an early Bronco. I think the last one I undercoated. One I used POR. This new build is going to be more of a 4x4 crawler. I would like a paint that I can coat it with, make it look decent, shed grease and so forth. In...

I am attempting to make my 70 more daily driver friendly. It is used for mainly sand and snow and other stuff. No rock bashing. I have stock bumpers and am keeping them. Here is my question: What type of add on lights are you using back there for reverse/night lights? I am going to use...

So I am starting on my S&S Bronco project. I call it snow and sand. Anyways, I am going 1/2 ton full-width. 1976 F-150 axles, HP 44 with disks and rear is stock. I am ordering parts, I order the "normal" rear wheel bearings and didn't think much of it. They are not correct when I got...

I am getting some new wheels for my Bronco. It uses full-with 76 F-150 axles with disks in the front. I want to use these wheels: https://www.summitracing.com/parts/brw-997795545 These are a 4.5" backspace. Will these clear the calipers etc? Do you think I could run a 5" backspace...

I am gathering parts and starting a new project Bronco. The end goal is an anchor rig. What that means is that it always runs, is reliable and pretty trouble free and not down for upgrades for too long. I don't want to mess up my nicer EB so I am building another one. Probably something I...

Hello all, I am prepping my Bronco for the Bronco get together in Florence next month. I feel it is time to upgrade to 31 spline shafts for safety if no other reason. So....my question is this. Are there any real differences between most of the suppliers? If you look at the end of the...

I am looking for a Bronco to build a snow/sand crawler out of. Ideally something that was either finished and sitting neglected or in the process of being built. I am thinking upgraded axles, dents, some large tires that type of thing. I would really prefer to deal face to face in Oregon...

I know a lot of people do their own harness work etc. EFI GUY seemed to be the go to guy etc. at least when I was on here regularly. What are your thoughts on the Ron Francis harness? Has anyone used it and had good results? Pros and cons vs. doing your own etc. Just starting to look at...

Hello, This question isn't really techie, but it is Bronco related. I am looking at options for the next build up. I have a crusty EB and really would like to try a diesel in it. It will be a crawler with the usual larger axles and tires etc. The Bronco is fixable, but pretty bad and I...

I have a very traditional 70 with TBP 3.5" lift front and rear. It has dual shocks on the front and singles on the rear-they are older shocks, I don't know the valving etc. It is probably 2-3 years old and very low miles. Rides OK. I have a horribly rough rural driveway. I don't even...

I am looking for Early Bronco sheetmetal primarily. Pretty much any of it other than the tub, although I wouldn't count that out. Fenders, hood, doors and a grill. Also, any new parts like floor pans or other things that you didn't use. I know I have leftovers from my build, maybe you do to...

I am done with my other Bronco project, time to get back to my favorite one which is my first Bronco I bought and have used. I have a stock 302 in my 70 currently. It runs well, but is a little tired etc. I acquired a new not reman 87 5.0 engine. I will eventually convert it to EFI but...

I am looking for a known good, known use front Tru Trac. Please message me some pics and a price. Serious buyer. Ideally something that hasn't been ran with big tires and abused of course.

Hello, I am gathering parts for my next build now that the last one is done. I am looking at running 37's, mild rock crawling and a lot of snow crawling. My usual MO is detroit rear and a tru trac front. I have tried another thing or two, but mainly those. A buddy has the following...

I have an engine that I am not going to put in one of my Broncos. I'd kinda like a rough idea on how to value it as I am likely trading it off. I know opinions will run from, "I wouldn't touch it until I had a Nascar spec shop go through it" to "install gaskets and run it". The heads are off...

Looking for a crawler body for my next build. Rough is fine, missing parts etc. I have a frame etc. already. Preferably in the Oregon, Nor Cal or Washington area. I have time and cash to deal with this for the summer. PM me is fine. Once I get the body, I will be looking for a set of...

I am looking at trading only for a rough or unfinished project early Bronco crawler project. My 66 is a great builder, and better than many for rust. There is some surface rust on the frame etc. but it is minor. If you want to pay cash I'm asking $6795 cash firm only face to face. 1966 Ford...

Hello, I was going through my stuff this afternoon and I remembered having a couple of 1975-1979 Ford F-150 ps boxes out of 4x4 trucks. I had more than a couple. Are these still commonly used for PS swaps or is everyone doing the Nissan/Cherokee box swap or something from a vendor? I am...