Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
dieselfarmer

dieselfarmer

Contributor
New Member
Joined
Last seen
Viewing thread np205 fit issues?
Messages
17

Latest activity Postings Images About

    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      Here is a nice looking support bracket design if you’re not interested in fabricating one...
      • NP205 trans case support 2.jpg
      • NP205 trans case support.jpg
    • dieselfarmer
      dieselfarmer reacted to rocknhorse76's post in the thread np205 fit issues? with Like Like.
      Yeah I definitely don’t baby it lol
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      Rocknhorse76, it looks like you have put it through the paces based on the description of your ride - thanks!!
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      There is a ton of good info on this forum - thanks for the comments. The pics attached show my "newly designed" np205 cross member...
      • Bronco NP205 cross member 1.jpg
      • Bronco NP205 cross member side view.jpg
      • Fox mustang trans mount.jpg
    • dieselfarmer
      dieselfarmer reacted to Yeller's post in the thread np205 fit issues? with Like Like.
      Not an old pic, took it yesterday 🤣 It is just to provide stability, really not an issue for anything running coil springs. Remember...
    • dieselfarmer
      dieselfarmer reacted to Yeller's post in the thread np205 fit issues? with Like Like.
      It will be just fine with the existing bolts
    • dieselfarmer
      dieselfarmer reacted to gnpenning's post in the thread np205 fit issues? with Like Like.
      The first picture is the bell housing end the 2nd picture shows the whole thing and the 2 holes on the tcase side. GM started using a...
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      Thanks for that nice old pic! Looks like the torque rod is not below the t case, it is on the side. How does it do any good located on...
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      Interesting. Given the weight of the NP205, I thought it would be smart to have some rear support for it (other than the trans cross...
      • Bronco NP 205 Mount 6.jpg
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      Any chance you could post a pic of the GM support rod from the Bell to transfer case? I did some searching and haven't found it. Thanks!
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      Thanks for the reply!
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      Here is a concept to consider. If a single cross member is best for purposes of the flexing frame causing issues with the drive-train...
      • Bronco NP 205 Mount Concept.jpg
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      What do you think about using a single mount on the NP205 based on the below photo? I would insert the fox mustang bushing mount in the...
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      Yeller - Are you suggesting the better approach is to build a single cross member mount only for the NP205 and remove the mount for the...
    • dieselfarmer
      dieselfarmer replied to the thread np205 fit issues?.
      A little ugly with amateur welds, but here's another pic of the 4R70W cross member for reference.
      • Bronco np205 bracket 5 mod.jpg
    Show older items
  • Loading…
  • Loading…
  • Loading…
Top