Recent content by Bruduf

Thanks that’s what i did worked out ok. Its ended up a while I’m in here might just do rear main seal and a bolt broke off in the timing chain cover so the front main seal too and new water pump and t stat oh and new hoses. Better stop now before it becomes a frame off!!!

Any tricks to getting the oil pan off while engine is still in bronco. Its all unbolted but not enough room at front frame rail!!! Guessing i need to unbolt enging mounts . Thanks

My carb was leaking after shutting off the engine so i got a rebuild kit from napa took it all apart soaked it blew out all the holes reassembled. Cold starts now require alot of cranking and more than the usual 2 pumps of gas pedal. It runs great after it starts wondering if i missed a check...

I bought these from NAPA about a year ago they are too harsh riding for my road use only 1970 170ci 6 bronco 75 bucks is less than half of what i paid. Used for 200 miles or less

I have a 6-1/2 foot quick switch plow I took off my 1970 bronco with 170 cu in 6 cyl. The pump, frame, lights controls are all included, the skid shoes are missing and 4 of the mounting bolts broke on removal. This is a complete setup for the 66-77 bronco very little use I can email pics.

Fisher 6 and1/2 foot power angle plow. Includes frame lights and all mounting hardware. There are no skid shoes . I removed this from my 1970 6 cylinder bronco , all control cables included, very little use still has the fisher emblem on blade. 800.00

New crate 2.8 diesel now available 8999.00 including shipping any interest

The back ear was broken off on my exhaust so I pulled the head and the machine shop welded a not sert. So far so good also had one broken bolt that I drilled out with some left handed drill bits

bruduf is able to strap to a pallet

where are you at I would be happy to box all of it up and even bring it to the shipper of your choice. The blade may be expensive to ship !!

I like hagerty too, but could only get an agreed value of 19,000 on my 26000 mile bronco I bought from the original 85 year old owner. Looking at the prices this seems pretty low to me for an original low mileage bronco in excellent condition.

6and a half foot fisher snowplow, I took it off my 1970 6 cyl this summer, it was not used alot , still has the fisher painted emblem on face of plow, comes with pump, controls, lights,mounting frame etc. you will need a couple of the mounting U-bolts, and the skid shoes are missing. $1,250...

I am interested in your bench seat if you are not going to need it

Where are you located

I meant calipers a friend of mine put some on upside down ;)