Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
armypilot_uh60

armypilot_uh60

Contributor
New Member
Joined
Last seen
Messages
15
Garage items
1

Latest activity Postings Images Garage items About

    • armypilot_uh60
      armypilot_uh60 reacted to Double66's post in the thread 66 Front hub removal question with Like Like.
      I've had good luck tapping on the outside of the hub housing with a hammer to free it up and usually it will work its way out.
    • armypilot_uh60
      armypilot_uh60 posted the thread 66 Front hub removal question in Bronco Tech.
      I am trying to remove the hub on my 66 bronco and I am following the factory service manual. I removed the one snap ring and it says...
      • IMG_6940.jpeg
      • IMG_6937.jpeg
    • armypilot_uh60
      armypilot_uh60 replied to the thread 66 Bronco project.
      Saga continues, after a visit to my local Ford dealer where my buddy is the parts manager we discovered the date stamp on the block is...
    • armypilot_uh60
      armypilot_uh60 replied to the thread 66 Bronco project.
      Well that makes sense now. Does water run through that plate? It looks like it has a hoes connection.
    • armypilot_uh60
      armypilot_uh60 replied to the thread 66 Bronco project.
      Just discovered something which really confuses me now. I just discovered that the carburetor I have for this vehicle doesn't even fit...
      • IMG_6900.JPG
      • IMG_6901.JPG
      • IMG_6902.JPG
    • armypilot_uh60
      armypilot_uh60 reacted to Jonathan_Cole's post in the thread 66 carb question with Like Like.
      You won't likely find one with the same linkage as your original. I had to remove the butterfly and linkage from mine and put it in the...
    • armypilot_uh60
      armypilot_uh60 posted the thread 66 carb question in Bronco Chat.
      I bought this carburetor off of Amazon, knowing that it is made in China and realizing that I would have to take it apart and check...
      • IMG_6892 2.JPG
      • IMG_6893 2.JPG
    • armypilot_uh60
      armypilot_uh60 replied to the thread 66 Bronco project.
      I bought a new carb from Amazon know that I would need to take it apart and check it out. However upon first look the linkage is...
      • IMG_6891 2.JPG
      • IMG_6892 2.JPG
      • IMG_6893 2.JPG
    • armypilot_uh60
      armypilot_uh60 replied to the thread 66 Bronco project.
      Here are some photos. I had the radiator checked and it is good, fuel tank is good but the sending unit is bad. New carb will be here...
      • IMG_6783.JPG
      • IMG_6844.JPG
      • IMG_6843.JPG
      • IMG_6842.JPG
      • IMG_6841.JPG
      • IMG_6840.JPG
      • IMG_6839.JPG
      • IMG_6838.JPG
      • IMG_6837 2.JPG
      • IMG_6784.JPG
      • IMG_6785.JPG
      • IMG_6787.JPG
      • IMG_6796.JPG
      • IMG_6798.JPG
      • IMG_6819.JPG
    • armypilot_uh60
      armypilot_uh60 replied to the thread 66 Bronco project.
      I looked at Pertronix but it does not seem that have one for the 170 engine. I sent them an e-mail asking about it. Thanks
    • armypilot_uh60
      armypilot_uh60 posted the thread 66 170 Oil bath air cleaner in Bronco Tech.
      I am starting on my 66 Bronco project. The internals of my oil bath air cleaner are in pretty bad shape. Is there a way to replace...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top