• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

74 Coyote Ranger Build (Updated 4 Dec 21)

1strodeo

Squirrel Watcher
Joined
Sep 15, 2016
Messages
3,596
Loc.
Wisconsin
Now you're just rubbin it in...I would too ;D

I expect to see that one on the 2018 Classic Broncos calendar
 
OP
OP
AFLtCol

AFLtCol

Contributor
Bronco Guru
Joined
Sep 10, 2012
Messages
1,069
That's beautiful!
What was the verdict on the body lift?

We went with an electric master cylinder that allowed us to go down to a 1" BL. The body shop is going to make front & rear roll pans that will fill in the body gap.
 

Scotty

Full Member
Joined
May 24, 2004
Messages
217
We went with an electric master cylinder that allowed us to go down to a 1" BL. The body shop is going to make front & rear roll pans that will fill in the body gap.

Nice! Good Solutions. Body lift gaps have always looked odd to me.
 
OP
OP
AFLtCol

AFLtCol

Contributor
Bronco Guru
Joined
Sep 10, 2012
Messages
1,069
Windshield and trim installed.
 

Attachments

  • IMG_9940.JPG
    IMG_9940.JPG
    116.1 KB · Views: 180
  • IMG_9942.JPG
    IMG_9942.JPG
    111.9 KB · Views: 177
  • IMG_9943.JPG
    IMG_9943.JPG
    134.3 KB · Views: 227
OP
OP
AFLtCol

AFLtCol

Contributor
Bronco Guru
Joined
Sep 10, 2012
Messages
1,069
No new pictures to share but have decided to do away with the 17" tires & wheels. Going with stock wheels, powder-coated argent silver, reproduction hubcaps and 31x10.5x15 BFG KM2s. Having to change out the bigger Wildwood brakes with their smaller package to accommodate the stock wheels. Also went with Fox shocks. Hardtop has been blasted and getting ready for paint.
 

SeaDrifter

New Member
Joined
Sep 26, 2016
Messages
17
Loc.
dallas
No new pictures to share but have decided to do away with the 17" tires & wheels. Going with stock wheels, powder-coated argent silver, reproduction hubcaps and 31x10.5x15 BFG KM2s. Having to change out the bigger Wildwood brakes with their smaller package to accommodate the stock wheels. Also went with Fox shocks. Hardtop has been blasted and getting ready for paint.


Likes that.
 

Crawdad

Bronco Guru
Joined
Feb 16, 2011
Messages
3,635
One of these days I'm gonna get down there to Tyndall. I regret not coming down there when we were down there weeks ago. Keep up the build!
 
OP
OP
AFLtCol

AFLtCol

Contributor
Bronco Guru
Joined
Sep 10, 2012
Messages
1,069
Nice.

How are you running the steering column/shaft?

BC Broncos will be installing the steering column/shaft. I believe they use Ididit, it will be an auto on the column and I believe they use a special shaft for the coyote.
 
OP
OP
AFLtCol

AFLtCol

Contributor
Bronco Guru
Joined
Sep 10, 2012
Messages
1,069
Going to Colorado Springs next week, going to swing by Bronco Hut to talk interior.
 

z70what

Bronco Guru
Joined
Oct 28, 2005
Messages
1,022
Loc.
Johnson City
this thing is coming along nicely... I may have to talk to BC Broncos about taking mine and doing the coyote install with $R70W trans..


which trans did they put in yours? hard to tell from the photos.

Luke
 
OP
OP
AFLtCol

AFLtCol

Contributor
Bronco Guru
Joined
Sep 10, 2012
Messages
1,069
this thing is coming along nicely... I may have to talk to BC Broncos about taking mine and doing the coyote install with $R70W trans..


which trans did they put in yours? hard to tell from the photos.

Luke

I went with the 4R70W trans. I believe they're also doing the 6R80.
 
OP
OP
AFLtCol

AFLtCol

Contributor
Bronco Guru
Joined
Sep 10, 2012
Messages
1,069
Monthly update. I shipped 5 stock wheels to be power-coated. Also went by Bronco Hut and purchased the fiberglass headliner and the Ranger ginger interior panels. Top should be painted very soon, but trying to decide if I should install a family cage before the top is mounted. If I do, thinking about going with the Krawler Edge cage. No update pics this time.
 

boonz28

Contributor
Sr. Member
Joined
Aug 28, 2011
Messages
477
This build is amazing. Truly one of the nicest I've seen on here, I can't wait to see it finished.

Keep the updates and pictures coming when you have 'em!
 
OP
OP
AFLtCol

AFLtCol

Contributor
Bronco Guru
Joined
Sep 10, 2012
Messages
1,069
Some Wimbledon White going on.
 

Attachments

  • IMG_0310.JPG
    IMG_0310.JPG
    113.8 KB · Views: 82
  • IMG_0311.JPG
    IMG_0311.JPG
    113.3 KB · Views: 76
  • IMG_0312.JPG
    IMG_0312.JPG
    96.1 KB · Views: 77
  • IMG_0500.JPG
    IMG_0500.JPG
    74 KB · Views: 83
  • IMG_0501.JPG
    IMG_0501.JPG
    73.1 KB · Views: 80
  • IMG_0502.JPG
    IMG_0502.JPG
    82.3 KB · Views: 83
Top