• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ethansdad73 Build thread....

OP
OP
Ethansdad73

Ethansdad73

Bronco Guru
Joined
Apr 8, 2008
Messages
1,630
Its off to the sand blaster this morning.... thanks again bax.

Sent from my PC36100 using Tapatalk
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
Fun with Me and my Hoe. Taking it down to the blaster for Ethansdad
 

Attachments

  • P1010001.jpg
    P1010001.jpg
    63.7 KB · Views: 155
  • P1010003.jpg
    P1010003.jpg
    69.7 KB · Views: 139
  • P1010004.jpg
    P1010004.jpg
    74.7 KB · Views: 133
  • P1010002.jpg
    P1010002.jpg
    69.6 KB · Views: 153
  • P1010005.jpg
    P1010005.jpg
    94.2 KB · Views: 141
  • P1010006.jpg
    P1010006.jpg
    95.5 KB · Views: 134

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
Swept tonight before I went in. little Rust chunks everywhere.
 

lonesouth

Contributor
Bronco Guru
Joined
Dec 18, 2003
Messages
5,045
Looking good. You guys always amaze me with how quickly things get done. Keep up the good work! How'd it go with the tubes?
 
OP
OP
Ethansdad73

Ethansdad73

Bronco Guru
Joined
Apr 8, 2008
Messages
1,630
Should be back from the blasters tomorrow...not sure what time but hopefully no more suprizes.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
He said late thursday. He had a bunch of patio chairs come in that he wanted to get done.
 

Revelation

Bronco Guru
Joined
Oct 9, 2004
Messages
4,810
If you are going to need the windshield cowl piece let me know, I have one up at the shop that has some rust, but not as bad as the one you have on the tub in the pictures.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
I think There is one ordered already. If not we could use it. there will be a 'little" bit of rust repair.
Hey Brian you know that stainless piece you gave me for my glovebox door. Well I used it to tune up the smoker. I needed a flame baffle and it worked perfect. Do you have a piece sitting around that would work for my glove box door?
 

Revelation

Bronco Guru
Joined
Oct 9, 2004
Messages
4,810
Not here at the house, but give me a dimension +1" and I will see if I can grab a piece next time I am up there, Looks like Monday or Tuesday.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
Cool Thanks. I will PM you a size. perhaps tomorrow.
 

Revelation

Bronco Guru
Joined
Oct 9, 2004
Messages
4,810
Sounds like a plan, And let me know of anything you need for the build also as I may have access to some stuff.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
Well, things are always looking up for you then.
 

yANK

Bronco Guru
Joined
Sep 6, 2006
Messages
1,001
Loc.
Saint Cloud
Revelation is the man thank you for your help today.I was working on my bronco today and i needed help putting on a hood and i was thinking who could i call to come over and 5 min later brian shows up and gave me a hand. By the way my six cyl sounds like 8
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
Well get that exhaust hooked up and your good then.
 

Revelation

Bronco Guru
Joined
Oct 9, 2004
Messages
4,810
Seriously Roger, that freakin 200 sounded like a 302, and the exhaust is on it.
And no problem Chris, Bax needs to look out, you never know where I might show up to turn a wrench or 2.
 
Top