• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Explorer EFI harness *Pic Request*

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,223
I am finally in the beginning stages of my swap so I have been emailing with Gary about my harness options. I don't have inner fenders so I need to decide where I want to mount my relay/fuse box and Gary will accommodate my request as long as it's not over 44" from the C115 connector. I would like to see pics of the C115 connector location with the PCM mounted right side up and upside down. That should help me determine the location of the C115 connector.

Thanks,
 

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,760
sent you an email Jaromy. not the greatest pics but something to look at.

Hank
 

Wyflyer

Bronco Guru
Joined
Apr 1, 2008
Messages
2,920
I’d like to help but I have no idea what a C115 connector is. IE which one
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,223
After watching the video again, it looks like yours is mounted right side up. If that is correct, I can see the location of the C115 connector in your pic and can use that to get an approximate distance to the relay/fuse box. Thanks

Starting at minute 32 in this video.
[youtube]RaY-9v-SO_0[/youtube]
 
Top