• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

'76 302 Fuel Pump bolts

No Hay

Bronco Guru
Joined
Jun 4, 2014
Messages
1,657
Ha! Just replaced the fuel pump on my '76 for the first time. The U tube video shows it, and claims it only takes 20 minutes. That was with the motor out on a stand. Mine took a little more than 20 minutes! I guess the next one could be 20. Standard ratchet set reached mine.
 

Hotrodjohn

Full Member
Joined
Feb 12, 2016
Messages
264
with power steering I find it easier to go from below. I use a small 1/4 ratchet with 9/16 socket and extension to make it easier to move around on the two bolts that hold it in.
 

Readhead

Full Member
Joined
Feb 7, 2018
Messages
155
Put it on top dead center to make it easier to go back in ... you will not fight the spring on the pump as much when you back in
 
Top