• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco Plug & Play Axle Housing!

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
8,548
3/8" thick tubes, and 1/4" plate center is a badass combo!


I'll say it is!! Great product!! I'm running the inner seal option on mine...

You're right, you aren't seeing things. That baby is standing on a scale!!
I'm weighing everything I'm taking off and replacing it with on this build...
 

Attachments

  • IMG_8624.jpg
    IMG_8624.jpg
    131.6 KB · Views: 49
  • IMG_8621.jpg
    IMG_8621.jpg
    160.3 KB · Views: 46
  • IMG_8623.jpg
    IMG_8623.jpg
    164.9 KB · Views: 49

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,378
Loc.
North Metro, MN
will the 11" drum brakes off my stock big bearing big brake axle bolt on? My end flanges are 1/2" bolts, 3.5" apart side to side, and 2 3/8" top to bottom.

Or does everybody just weld on the disk brake kit??
 
OP
OP
Gravel Maker

Gravel Maker

Bronco Guru
Joined
Sep 13, 2006
Messages
2,351
Loc.
Sacramento
bknbronco-

As long as you are running the 'big-bearing' axles then all should work just fine. Ours are for sure 1/2" holes, I'm not a spot currently where I can go measure the pattern, but it is the same as the stock big bearing pattern. From there out, should work with the stock drums, or the common disc upgrades.
 
Top