• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear disc without moving the shock mounts

betzgb

Contributor
Sr. Member
Joined
Dec 22, 2009
Messages
167
I have a heavy duty Ford 9" housing with a big bearing and the wider 2 3/8" bolt spacing with 1/2" bolts. Do any of the rear disc conversion kits out there bolt up without have to relocate the lower rear shock mounts or use the kit to mount the lower shock eye on the inside of the shock mount?
 

phred

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
3,432
Loc.
Earth
All you need to do is mount the shock on the in board side of the mount. You will need a longer bolt and a sleeve to keep the mount from folding in. I’ve run out them like this for years.


Sent from my iPhone using Tapatalk
 
Top