• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tranny dropped

ledslinger29

Full Member
Joined
Aug 31, 2016
Messages
190
While I'm rebuilding the motor. as you can see, after 48 years leaks have gotten a little hard to zero in on. Gonna clean all this up and put new seals on all of it
9e35ea80ff9fa56b42ee04949eabd8cd.jpg

1a8d3e39c8dbcd6b6cc742d6e68f3fff.jpg
2fa36cd41c2d6bd9d28768261cc74ac0.jpg



Sent from my iPhone using Tapatalk
 

muskrat

Bronco Guru
Joined
Aug 21, 2008
Messages
1,503
sure do. they were fun to work with getting the TC back in.
 

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,412
Loc.
Statesville, NC
Hi, I thought there were 13. A coat of grease will hold them in place. If they don't fit and fill up the race you don't have all of the bearings. Good luck
 

Smedley

Sr. Member
Joined
Feb 28, 2004
Messages
918
Loc.
Snohomish
I just did the same thing and it was confirmed by several on here that there should be 13.
I cleaned and painted and then brought to a local shop and they replaced all seals and put T-case and transmission back together. About $200.

Will
 

migs

Sponsor/Vendor
Bronco Guru
Joined
Nov 12, 2011
Messages
1,311
Nice! that's some grade A rust prevention right there, you sure you want to get rid of it?;D If you were lucky it would have flung more of it up to the floor boards...it really helps 40 year old seat belt bolts to come right out.%)
 

Toddpole

Contributor
Sr. Member
Joined
Jan 2, 2008
Messages
832
Get all that grease and dirt off and she'll pick up 2/10s in the 1/4.
 
Top