Search results

Any chance this is U15GLR90650? I am still looking for my old 73...

it would be cool if they remade them with even a star or something in the middle, it does not have to be Ford or Bronco. Maybe we are asking the wrong question?

What is the one 2 back from this one? It looks like another Bronco? Dennis

I never got a response, the guys name was Bret. I worked the original deal with him and then handed the project over to Jim as I did not have time to handle ordering, shipping and such. Feel free to chase him down, I am not sure if he is still in the same role, but he should be able to direct...

Does anyone have a direct line for Baumann tech support? I have emailed, and called several times, with no response. I have three wires remaining to connect my controller and it is impacting my first test drive with the Coyote. Essentially, I need to know what to do with the green wire if your...

Guys, I will be going back to Wisconsin from the Denver area the week of June 15th with an empty trailer. I sold my Bronco (to my Dad) and will be bringing back a GT40 from Race Car Replicas. If you need something hauled back that way, let me know. Thanks Dennis

I have a nice quicktime that will work. PM me if you are interested. I had it mocked up to my 4.6 DOHC, before I swapped the Coyote into my Bronco. D

There is no need to antagonize him, you posting in an over year old thread does appear as though you were not paying attention. You would not be the first to do so without reading. I am glad you did, I still do not believe this is a lost cause, give me a day on the email I sent, then I will PM...

I emailed the guy I started this project with at Plasticolor to see if he could provide more detail. IIRC, I did a year ago as well to which he never responded. Plasticolor is a licensed Ford supplier, so I am not sure why they are saying Ford has stopped them. I emailed him again, if I don't...

After a holiday hiatus, I jumped back on the Coyote swap today. I am burned out on this swap, but I need to get it done before next summer. Its been almost a year since I had it going. I am thinking about selling it but I need to get it back running and driving first.

I'm back at it making slow progress. I really missed having it to drive this last summer!

Coyote Conversion I made the best progress I have in months. Finished both headers. With the 4.6 I ran the headers under the oil pan and with anything above 4" of compression the driveshaft on my full width axles would hit. Now I ran it between the driveshaft and the frame. I should have an...

Progress has been slow. I have worked through all my interference issues. The KRC kit is very nice, I am slowly starting reassembly which is nice. Here are some progress pictures.

I would as well, I did the research and groundwork to find these mats and turned the project over to Jim, at the time I talked with the manufacturer, they were an official ford licensed supplier. I guess they lost that certification? On a side note, I got fired up to find these mats after...

I work for Cisco, among other things, we sell IVRs and contact centers to very large accounts in CO, AZ, NV and UT. IIRC, the industry recommendation is ~2 layers of IVR for inbound customers. Many companies go much deeper, and there are quite a few that break other best practices, but to keep...

I have not done anything since my last post. We just got back from a spring break trip with the kids. I need to get going on it, maybe this weekend. D

I talked to the guys at KRC, they recommended Krc 66302050 the kit for cast iron pump, bracket and water pump pulley. They also suggested the remote resevoir KRC 91500000. This will outflow a factory ford pump and has changeable flow valves if I run a ram or something bigger. Dennis

Your welcome Shane! Here is another power steering pump bracket http://www.backdraftparts.com/controls-pack-2011-5-0l-4v-manual-transmission-887.html

Here is my current progress, I shaved one side of my column and now have 1/2" of clearance...problem solved. I loosened my steering box and with it out around 3/8" there is a slight interference with a boss on the alternator. If I make a spacer to go between the box and the frame and shave the...

Yea, I am using all the same mounts from my 4.6, including my motor mounts. BTW, they are modman motor mounts and are a nice piece. I was able to notch my steering column and now have 1/2 inch clearance. It actually has a little more than my 4.6. I am really struggling with the power steering...