Search results

You are right about communications being very important. The problem from our side is our venders give us a delivery date so we plan on getting them on that date plus a few days because they might be late and let our customers know that date. Then the venders main tool breaks down so they dont...

This is Chuck, I don't work at BCB any longer but take tech calls when Jason is too busy. so now I can talk a little freer. First I nor Jason has ever cheated or burned anyone or anything like that ever. The only problem comes when it comes to shipping. it has always been my option that if we...

My advice is DO NOT GET THE WHITE It will be dirty before you get it on and only get dirtier after that. Even with the above warning we still sale a few white tops. The other colors are not so bad.

The 79 Lincoln with 4 wheel disc brakes uses a 1 1/8" bore. It works well.

You can use a large deep socket and a C clamp to force the inner sleeve and rubber out then a hacksaw to cut through the outer sleeve and you are done. If you have a hyd. press and a sawsall that makes it easier.

The caddie, ford and gm calipers that we use on the EB are all floating calipers so both pads apply braking pressure to both sides of the rotor. PS I understand why drum brakes do not stop as will going backwards and I understand why the band ebrake works the same in both directions and I...

You are absolutely right. The only thing I can say is like all things the job is never done until the paper work is done and the paper work is not done. I will talk to Jason about that.

Anything is possible we had a VW bug come into our shop with a 4 on the tree, looked stock.

You can make a hole on the passenger side of the cover or put our cover on and screw the wipers to it.

I was talking to Jason about the tops at lunch today and he told me they have the wait time down to 1-3 weeks now depending on what color and soon the shipping on big boxes is going up so this is a good time to order for xmas and ask about the xmas sale. I am not saying there is one but they...

I sell rear disc brakes and run them on my stuff. Hear is the pros and cons as I see them. Pros, no brake fade when hot or wet, less chance of rear lock-up so better down hill control and in a panic stops and easier to replace the pads than shoes. The cons, even when adjusted correctly the...

Yes, we provide the lowering bracket with the top

bout my top. The seams run front to back because the available material is not wide enough to go all the way across the EB top with one piece. So I had the choice of having two seams go across the EB or having two seams go the length of the EB. I picked the front to back seams because they are...

FYI, just so you all know, We designed the BCB top to fit over any cage that would fit under a stock top and our top will accommodate any doors that will fit a stock hard top including the stock doors. The BCB top uses the stock door rubber so any door seals to the stock hard top will seal to...

I am very sorry to hear of Patti's passing.

The one we have built uses the d-44 axle blanks cut to length and splined to fit. the seals are installed in the axle tubs so have to fit your tube ID.The tubes are welded to the housing so should not leak even if the seal is bad so I am guessing the oil is coming out near the u-joints? The axle...

Paul-all I just checked my 1976 ford shop manual, on page 15-30-5 I find the numbers as follows. lower nut= 70-90 ft lbs. adjuster sleeve 40 ft lbs and the upper nut 100. go a little tighter if castle does not align, do not loosen. PS if the spring scale exceeds 26 lbs to turn the knuckle...

The I6 frame is fine but you need to have the weld in V-8 mounts installed.

Rust can be very expensive and time intensive. Here is a few common rust problems to watch for. https://bcbroncos.com/buying-tips-look-out-for-rust/

Looking back through all the post here it seems that we are maybe being a bit jerkie but I don't think anyone mint their comments like that. Only trying to prepare you for you great adventure. Let me add this, no matter what you decide every person here will do their best to help you out. My...