Search results

I have the bag with a small metal motor/pump mounted on the firewall. I was able to get the motor and pump apart. The motor works but the pump doesn’t. The two little “gears” in the plastic pump housing must be worn. I have seen similar new pumps on some of the vendor sites but would like to...

Thanks all for your comments. It is the bag type reservoir with a small electric motor/pump mounted to the firewall. I was able to get it all apart. The motor works fine but the pump doesn’t pump. It’s just a couple of “gears” in a little plastic housing. Any ideas on where I might find an...

Thanks for the tips! i'll give it a try tomorrow morning.

The washer fluid pump on my 1966 Bronco had not been used for many years (20?). The pump spins but does not pump. I saw something somewhere about maybe having to prime the pump. Any thought s on this?

The handle would only turn slightly. found out the screw on the left had backed out and was catching in the handle. With an ice pick, paint scraper and flat blade screwdriver I was able to get the screw out and turn the handle all the way. I used a vice grip on the back side to hold the handle...

Thanks all. I’m out of town for a few days but when I get back I’ll post a few pics for clarity. I’m already learning! Mine is a U15. Not sure of the born on date, but it was delivered I believe in April of 1966. I am the 2nd owner. It was included with the cabin we bought in 1999 and has...

Thanks Jim. I'm am looking forward to learning a lot from this site. I found the plate on the back and removed it. I saw where the handle shaft comes through the mechanism but could not figure out what holds the shaft/handle in the mechanism. I understand this handle setup is unique the the...

I have a 66 Bronco wagon with the separate lift gate handle and lock. The 2 screws that hold the handle to the lift gate are loose but are blocked by the handle. How do I remove the handle to tighten the screws? Thanks!