Search results

How about some Gorilla Glass? https://shop.broncograveyard.com/mobile/1966-1977-Ford-Bronco-Gorilla-Glass-Windshield/productinfo/17301/

I built my own windshield braces, and made these brackets to attach the braces to the windshield frame using the riser bolt holes. Still need to shorten the bolts down a bit!

That's weird. From your pics it looks like if it was orientated in its current position you would have to remove the crossmember and mounting bracket to service your trans filter. If that is the case, send that thing back to BC and buy Tom's bracket (for a lot less money). You shouldn't have...

That straight run of frame your radius arm brackets are welded to should be pretty close to level when the body is on. Compare the intake manifold carb base to it. Have you tried rotating that bracket 180 degrees yet? There is no way it should be oriented in that position. BC's picture of...

The carburetor base on your intake should be level.

Did this crossmember assembly come with instructions? I ask because I couldn't find a digital copy available on the BC site.

It looks like the bracket that goes between the adapter and the crossmember might be installed backwards. In its current configuration it is going to be (nearly?) impossible to drop the trans pan. I have the TBP crossmember and it fit perfect...

https://classicbroncos.com/forums/members/admin.1/

:ROFLMAO:

(y)

If the door panels are factory, each one will have two small dimples where the holes need to be drilled.

👆 Not only does the Explorer front dress swap give you a better alternator, it also gives you a factory clutch fan that fits in our engine bay and can really suck a lot of air through the radiator!

Search “4x4x2”

Yup.

The struggle is real, Brotha. I'm 5'9" and have to scrunch down If I am one of the first few in line. Might want to check out nvrstuk's thread on how he lowered his floors. Don't let your disability slow you down. lol.

You should be able to look right over the windshield frame to see the traffic lights. 😇

I'd just give WH a call and ask what fabric it is. They have always been great at helping me out when I call.

Have you looked at Tom's Breezer top yet? I switched over last summer and love it. It still lets some light in, but takes care of the Sun's glare. It also doesn't balloon or flap like the standard solid bikini does. My riser is from an old Kayline top (same riser as the Rampage) and the...

If you want to run the earlier front turn signal buckets/lenses, do the Alice mod. https://classicbroncos.com/tech/the-alice-turn-signal-lens-modification

Like anything else, it is a tradeoff. Longer radius arms will give you a better ride, but the extra leverage will also increase body roll. To counteract the increased body roll front sway bars may be needed. And my wife wonders why one mod snowballs! I think most long arms have caster added...