Search results

I slapped on a new carb, bought a carb tuning kit, new rotor and wires and had my old rig dyno-tuned on a chassis dyno. This was many years ago and I think I paid $180. They found a bad balancer in the process. Truck ran like fuel injection after that, with the exception of hard starting due...

It's usually a round antenna plug. You may need to get one at Radio Shack and wire it to the existing factory antenna and then plug it into new radio.

This is up the road a touch, but it gives you a little idea...surely it's warm enough to swim after a beach run....nice blue-green water...small swell runnin'...enjoy :) http://video-monitoring.com/beachcams/lakeworthinlet/

As long as my power stays on so I have A/C I'll be fine. BTW--I went in the pool this weekend after goinf for a bike ride. It was a little cool for my liking, but very refreshing! Good luck y'all!

They are nice if you wheel through a lot of mud as they still usually work after a major dip and slog, but if you want/like an emergency or parking brake, then you'll get very good at adjusting the Caddy calipers (if you go that route) so that it works. I think properly adjusted drum brakes...

Maybe Evil69 has a helmet you can borrow....

I'll take the Stroppe please....were the originals black under hood? BTW--I didn't see anything negative posted--maybe I'm reading too fast. You want negativity--lemme dump my work emails on here some time--mostly the Friday afternoon "Is it done yet for free.." ones. Nothing wrong with a...

You don't say whether they are power-vacuum, power-hydro, or full manual brakes. Could make a difference. Once shoes, pads, wheel cylinders, calipers, rear shoe adjust is all OK, there is an acorn nut type of adjustment between the master and a vacuum assist system that might need adjustment...

BINGO! Flowmaster makes a 50 series with two 2 1/2" in, one 3" out, works like a crossover inside = best of all worlds....simple, lighter than duels, more room underneath for other things or to keep heat away from fuel line, easier for maintenance, sounds good, purrs like kitten on highway...

Whoa....WHOA!! Where in the world did you get THAT keyboard?? I don't see any of those buttons on mine....

Naa ah can see wheh he pahked the cah!

Thoughts and prayers out to you and yours. So good the family is safe. I did some volunteer work cleaning up after Hurricane Andrew down here (the homes were not quite as bad as what you have as they are mostly made of concrete block down here, but the insides were gutted and the neighborhoods...

If you can get some insider information, see if you can find out if 4WP in Orlando is planning any buy 3 get one free deals any time soon. I wouldn't hold my breath though as most of the time those specials are just on the Pro-comp tires. DANG those are pricey for that size.... On another...

Just confirm with WH with the unloaded measurement and part number and you'll be fine. You may have a slight prerunner look before full settlement and you may choose to adjust your rear stance to your taste. The biggest issue is front DS bind if you run correct/positive front castor with a...

They should fit the heads, but with the manual tranny you could have issue with linkage. If they are shorties you stand the best chance at clearance. Long tubes may require modifications. If they are a good price and don't fit you could always resell and not lose.

I've used this and it is a good bearing grease, but you still need to repack if you go mud whumpin' all day in deep water. At least it is a light colored grease so you can easily spot the contamination. I've never seen it sold in a tube for the grease gun, but it might.

Bottom line....if you are driving through deep water for extended periods get used to doing regular maintenance on all moving assemblies below the water line. I've tried all of the above and water still gets in. I've left it and rotted hubs, bearings, spindles and replaced and repeated. If...

That's good....sort of has a dry English humor flair....I get that from watching Top Gear BBC...8-)

Philitagain......what, WHAT?!

Phil McKraken......what?