Search results

Hi all - I have a very leaky transfer case... coming from somewhere on top... assuming gasket is bad. My understanding of a transfer case is that is engages the back axel for 4WD. If I only drive in 2H, do I still need the functionality of the transfer case? Or can I drain it and call it a...

Have gauge stuck on past full. When ignition turned off, goes back to Empty. When wires unplugged from sender, goes to empty. Checked Ohms on sender unit and it read 8.1. Knew it wasn’t full - it held 4 more gallons, still read 8.1 after filling up. Thinking sending unit is bad? If so, how...

Hey everyone - would like some opinions on what could be going on with my setup. Just got a new alternator b/c the mechanic fried it when putting in a blueprint 302… the old alternator, to my knowledge, did not have any issues with squealing but the one before that did before it was replaced...

Looking for someone with experience in tuning Fitech EFIs on a new blueprint 302 in Kentucky / Indiana area. Or, if you are a pro and can help via Facetime, I'll give you some money!!

Hi all - Currently have a black front grill and a red bronco. The entire grill, including the part around the headlights and sides is black. It appears as if it wasn’t actually painting with a finish coat, if that makes sense. Almost like the black is a primer. Anyway, any thoughts to spray...

Getting new engine (blueprint 306) in a 74 bronco. Has slightly larger than stock tires. Bronco will be used for driving around town, max speed 65-70 mph TOPS. Longest trip will be 45 mins or so. Decent amount of stop and go around city. The current stock trans works fine, shifts smoothly...

Where is the best place to get a new or rebuilt AOD transmission? This will be on a 306 for a 4WD 74 bronco

Have a stock 302 in my 74 Bronco... leaking everywhere, they are going to do compression tests but we think we know it's not going to be good, along with the other things going on. If a new engine is needed and I don't want to wait on a rebuild and just want to go crate engine... 1) what are...

PSF running low. Do I need to find out what kind of fluid was in there before or just add normal PSF to get it to appropriate level? Wasn't sure if there is an issue with mixing or needing to bleed out what is in there already.

Just purchased a 1974 bronco, body not taken off restoration so there is some surface rust on the frame, nothing structural. Here is what the owner did to it before selling it, other than body work, new paint, seats, roll bars, seat belts, and other cosmetic items: - new breaks (drum in rear...

Bronco noob... curious which one of these is a better "deal", or anything that are red flags from the descriptions, year, etc... or even what they might be worth / should be offered. Thanks so much. https://classics.autotrader.com/classic-cars/1966/ford/bronco/101704061...