Search results

I am in the middle of an ongoing discussion about the color of the bottom side of the tub. The color I am seeing on a 70 and a 71 do not agree with what is “standard”. The area above transmission/transmission is probably a good place to see the original color. This isn’t the exterior color or...

I have done a little research and I am confused. So my 1972 bronco with a 170 is down with engine problems. I have access to a free 1965 200 out of mustang. Is the bellhousing pattern the same? All the mustang/falcon pages have me confused.%) So will the 65 200 bolt in place of the 1972 170?

Driving to work this morning running 60mph Bronco started coughing a little bit then was fine for a few seconds. Then started misfiring really bad again. Pulled over could tell engine was missing. Could rev engine and it would break up bad around 3k or higher. Then all of a sudden it would...

http://http://cgi.ebay.com/ebaymotors/Vintage-Sun-10-000-RPM-tachometer-rat-rod-/370401013930?pt=Motors_Car_Truck_Parts_Accessories&hash=item563d9ef0aa How old is the tach in this link? I have the same tach in my 1970 and was wondering the vintage.

I was crusing alog on my way home from work today. This little jewel was going about 45 in the slow lane. Passed him, slowed down, and followed him when he exited the interstate. Only got to talk to the owner for a min. But this thing looks like it is all original. Paint and all. And its for...

Would you be willing to buy a shirt like this and what would you pay for it? I am thinking about having some shirts made. Navy Shirt with White logo and text.

I am putting new brakes on my 1970 bronco tomorrow. Which is the only the 3rd time it has ever had them replaced since it was brand new. First time at 24,500 miles on 1-18-1973. Second time at 55,590 miles on 10-12-1984. Now at 91,221. Thats just over 25 years and 35,631 miles. How is that for...

not going to name any names ;D ;D ;D ;D ;D :-X :-X :-X :o :o :o :o

I am sure some of you have seen these.....but I thought I would share just in case. I though they were really nice. http://www.off-road.com/dirtsports/Masterpiece+In+Metal/Golden-Icon-Parnelli-Jones-Timeless-Big-Oly-Bronco/ArticleStandard/Article/detail/470191#

Who has the best deal on gears now? I bought front and rear 4.88 yukon gears and install kits a few years from complete offroad I paid $419. They now want $562 for 4.56 yukons. That is a little bit of a jump. Anyone got any other suggestions?

Today I crawled up under the bronco and looked at the rear drive shaft. I noticed Plastic hanging out from in between lower half of the driveshaft and the U-joint. When I looked closer I noticed the the cap? in the end of the lower half of the drive shaft(red arrow) was missing. So you could...

I never heard of this before. I was told about this today. I had no idea there was such a thing. Just thought I would share this. "one tooth of pinion gear is grooved and painted, while the ring gear has a notch between two painted teeth. If the paint marks are not evident, locate the notches...

Today I went to drive the bronco over to a friends house since I am going to Alabama for a week. I tried to roll the window down and something let go inside.:mad: I think the track that was on the bottom of the window glass pulled off the glass because I heard something fall.......Ok well...

Here a few pics of my new cage I built(ok...I had a couple helpers). What do you think? I am going to come back later and tie new seats(Baja SS?) into the cage and add harnesses. Paint for the dash will come later also.

I was searching around looking at some different cages that people have built and now I am wondering how much tube you guys are using. I know this depends on the cage design. Could I get some pics of some different styles of cages and about how many feet of tube you used. I would like to build a...

I am taking a Fabricating class and we are getting the chance to tig weld. I would compare MIG welding to an automatic transmission and TIG to a Manual transmission since you use 3 out of 4 of your Limbs. Its a whole new ballgame. We have worked on Aluminum only so far. This is with about 2.5-3...

What is the width of the stock rear axle. I found 58" Wheel mounting surface to wheel mounting surface searching around. Is that correct? Does anyone know how far off center the center line of the pinion is? Does anyone know the axle shaft lengths off hand for a small bearing?

I want to see some pictures of some custom rear wheel wells that have been lengthened after stretching the wheel base. Or whole new fabricated wheel wells. Got some ideas running through my head for my friends stretched bronco. The rear axle is moved 5 inches back.

Anyone else heard about this? http://www.al.com/news/birminghamnews/index.ssf?/base/news/1213258541209780.xml&coll=2 Cullman County's Stony Lonesome OHV Park to open this fall. Thursday, June 12, 2008 A rugged, 1,456-acre spot in southern Cullman County will be abuzz with motorcycles...

Why in the world did Ford use different size pistons from the factory? In my Chilton's Ford Engine Overhaul Manual it lists four different size pistons for the 289/302. It lists them for other engines too, but for the sake of discussion lets focus on just the 289/302 Code Red 3.9984-3.9990in...