Search results

Does anyone know what wire gauge size is sufficient for waste spark coils? I’m wiring up a Holley Terminator X Max to use my waste spark coils. Holley doesn’t make one and I don’t want to chop up my COP harness so I can go that route in the future. Holley terminator uses a 20 ga wire for the...

Can anyone tell me how to remove the hood spring latch on the front of the hood. I feel a nut behind it, but there’s no way to get a wrench or socket in there to unscrew it. What am I missing?

Looking for a little help from the 351W gurus!!! I'm running a 351W with the Trick Flow 11R 190 heads and Trick Flow R intake (the EFI version). I'm running a 1" body lift. My hood is the Bronco Designs mid-rise premium fiberglass hood and it looks like I am about a 1/2" shy of clearing the...

Does anyone know where i can find the stud bolts that bolt down the 2 front holes on the intake and hold the wasted spark coils bracket. They look like a bolt with a stud coming out of the top of the head. Both of mine broke coming out and cant seem to find them anywhere.

Thinking about buying the Holley Terminator X max to control engine and trans instead of moving forward with the explorer stuff. Are there any downfalls besides the cost? It’s going on a 351W with Ed Curtis cam and heads around 330hp / 400tq at the wheels and trans is a 1999 4R70W. EFI guy is no...

What is everyone using to mount there explorer ecu's? I've heard some from escapes and windstars. What model and year model should I look for at the pull a part? Want something that I can pull the ecu out from under the hood and don't want to have to go under the dash to remove it. Any advice...

Getting ready to start my Explorer EFI conversion on my 351W. So far I have gathered everything I need except the intake manifold. Does anyone know where I can find a Ford Lightning (5.8 ltr) lower intake?

Does anyone know if Gary (EFIguy) is still doing the explorer harness conversions and PCM flashes. Noticed he has'nt been on the site in a while.

Hoping someone can lead me into the right direction. I replaced my hydroboost bracket from angled to staight offset. Once I put it back together and bleed the HB and the master cylinder i have spongy pedal. So much so that it wont even depress the brake light switch to turn the brake lights...

Has anyone bought and installed the inline hydro boost bracket from eBay. Its the one for the 99-04 mustang hydro boost and master cylinder. Installed mine tonight and having serious fitment issues. The master cylinder is hitting the fender once installed and can't get brake lines mounted as the...

I am getting ready to buy new 16" wheels with 35 x 12.5" tires. My old wheels stuck out past the fenders too much, never liked the look. They where what looks like 3.5" ish back spacing and 10" wide wheels. Wheels that I'm wanting to purchase are 4.25" backspacing and not sure about the rim...

I'm in the process of piecing together everything I need to do the Explorer EFI swap on my 351W. Hoping some of you that have done the swap can give me some ideas on the fuel pump setup. I definitely want an in tank pump so what options does that leave me with a 23 gallon bronco rear tank? Can I...

Has anyone attempted to rework an explorer wire harness themselves. I think i want to try to do it myself being that Gary is so backed up. How hard is it to do? I have all the tools and a good understanding of what it takes (watched the videos that efiguy made). Just curious how tough it was...

Having a problem with my parking lights and was wondering if anyone has run into the same thing. When i put my parking lights on the will come on for a second or two and go off and the gauge cluster lights will go out as well. Signals and headlights still work. Seems to be isolated to parking...

Hoping to get some help from those who have some 4R70W experience. I installed a 4R70W a couple of weeks ago and i think i overfilled it on the initial fill. I added 1 quart to the TC before install and poured about 5 quarts on after install but before i started the engine. Poured in 6 more...

I'm having a problem getting the ball flange to seal on my BC Broncos shorty headers. Does anyone know of any tricks or anything I can use to get them to seal better. One is leaking no matter what I do, just had exhaust redone and it's still leaking. It's causing my Fitech to run rich with the...

Started my 4R70W swap as of tonight. Have the C4 out and getting the new trans prepped to be installed in the morning. Have a question about the starter, will the old starter from my C4 bell housing work with the new 4R70W?

Does anyone know what size the inverted flare fittings are on a 1999 Explorer 4R70W. Looking to convert to 6 an fitting coming out of the transmission but don't know what size the inverted flare fitting is to get a conversion fitting. Also, if anyone know what size the cooler hard lines were...

Getting ready to do a 4R70W swap and don't want to mess with modifying the rear cross member. Has anyone used the Toms custom cross member for this swap? Wondering how beefy it is and if it is a true bolt on or does it usually need some tweeking? Just want something the is bolt and go.

A new facebook page was started by a local guy here in Lafayette to get the acadiana area bronco owners together. If anyone is interested here is a link: https://www.facebook.com/groups/694135774416902/?epa=SEARCH_BOX Page was started a day ago so its light at the moment but hopefully it will...