Search results

Delete, incorrect post.

Sometimes referred to as Borg Warner Dana 20 Overdrive. Hoping to find one that is complete as possible with a working solenoid.

Looking for an old set of rear leaf springs, nothing fancy as they will be used under a trailer project. Anything around 2.5 or 3.5 lift would be perfect since I'm trying to match the lift of my Bronco. Prefer something local or a short drive since I don't want the hassle of shipping. Thanks, Kirk

I found a bad lower ball joint on the pass side durning my locker install and just replaced all four ball joints today(upper and lower on both sides), but now I have some unwanted side effects. It seems like the steering is sticking and grabbing now, it wants to pull off the centerline more so...

Install went great and locker works great as well, but now I'm not certain about the gears. I always thought I had 3.50 gears since they seem to be the most common, the only thing that seemed odd was my rpm was higher than other posts I've read regarding gearing/speed/rpm combos. I wrote down...

So after reading everything I could find on the site about coolant leaks I think I've got it figured out, just need a little sanity check. All this time I thought it was my intake manifold gasket b/c it had a small leak out of the front of the manifold when I picked the engine up, but I should...

Here is what's is left from parting out a 72, prefer not to ship but will do it if needed, make me an offer and it's yours. 1. 3 spd transmission 2. 7 blade flex fan 3. Passenger seat hinge set (rusted but works) 4. Manual steering box (moves) 5. Hood w/scoop (hole cut for scoop, will split up)...

I started tearing down my old engine and this is what I found. Possibly a crankshaft bearing? http://s740.photobucket.com/albums/xx50/kinderbitzen/CB%20Post/

I'm fighting a battle on getting it to seal up on an engine I picked up a couple of weeks ago. It had a bit of coolant coming out of the front of the manifold is the reason I changed it. First a bit of history on what I've done: 1st one I put in went in dry except for a dab of black rtv at the...

Fellas, I picked up a used 12 gal aux tank locally (no mounting hardware or install instructions) and I'm trying to figure the best way to mount the front of the tank. I pulled my old plastic tank out with the stock straps and then jacked up the steel tank to check the fit, no problems. It...