Search results

So I'm in the middle of a ZF/NP205 swap and just hit a snag. The 205 yokes are 1330 and I had drive shafts made accordingly. Went out to install the new shafts and the yoke on the 205 is wider than the shaft side that meets the yoke. Measuring the yoke from bolt hole to bolt hole is 3 1/4"...

Lookin like a great chance to grab that stuff you need to finish the winter time project! They have a little bit of everything on sale and also a good chance to get a 10% off gift certificate. If you buy a $500 certificate, your only paying $450 for it. Buy yourself a certificate and use it...

http://youtu.be/JzNgGgHC7Fk Thought this had some neat story and pics of Big Oly I don't recall seeing.

So, I'm new to the ARB and it's ways. Obviously as far as the supply to make it work could be just a case of buying the ARB compressor kit. I would like to see what others are using for an alternative and what is the best, most cost effective way to go. I've seen the A/C compressor setup...

So, on the build of wifey's Bronco I ran into a little bit of a concern when changing the valve seals. One of the rockers had a double nut holding it down as opposed to the positive stops like the rest. Kinda has me worried that something was up with those heads? Anyway, I just bought a front...

http://www.youtube.com/watch?v=IzaFoBagGHY&feature=related Is this anyone we know on here? Your out enjoying a nice cruise in the Bronco and some clown causes this! Glad they were ok!

Has anyone tied an EFI harness of anykind into their existing Centech wiring harness? I am considering that space aged fancy high falootin EFI stuff and checked with Centech about a possible plug and play harness like Painless does. The answer I got was basically that there wasn't enough...

I am building my wife a Bronco and using a 77 frame and a 69 body. I noticed that the trac bar bracket drops alot lower than what I remember ever seeing. I looked at the one on my 72 that is also in the garage and it is definately shorter than the one on the 77. This Bronco didnt' have any...

http://cgi.ebay.com/ebaymotors/Ford-Bronco-1969-Ford-Bronco-Frame-Off-Restored-1-of-a-Kind-California-Built-Brand-New-Cond-/251001150716?pt=US_Cars_Trucks&hash=item3a70d59cfc I think this one takes the cake for the "I'm outta my mind" catagory!:o

So, I originally bought the primered 69 as a project of my own about two years ago. It belonged to a guy that was a friend of the family for years, that passed away due to heart failure. This was the last one he was working on which had new fenders, new rear lower quarters, great doors...

Thought I'd share a pic of the sweet table my brother made for me for Christmas, for my mancave! He built the base and then used a glasstop from a tabel that a friend was throwing out. He masked off the design and sandblasted it to etch that into the underside of the glass. The center under...

This design will revolutionize the way we enter and exit our Broncos! Not to mention the fact that it makes spark plug and header maintanance a snap, due to the ease of access! Only draw back...you have to wait 35+ years for mother nature to build yours!;D

I'd like to see some machines wearing front flares on the back(left front on right rear and right front on left rear) I'm building a trailrig and have two sets of urathane front flares and wanna use a set on the back. I won't have rockers and will shorten up the rear extention, so the bumpout...

Ok, I'd like to think I should get a prize of some kind for the most obscure object that came with our parts. I recieved my Yukon axles the other day and couldn't figure out why chromoly axles weighed so much???? I opened the box and figured out why immediately!;D;D;D It is about a 4"...

ALL BRONCO BROTHERS AND SISTERS OUT THERE, PLEASE GO TO THIS SITE AND VOTE FOR RANSILS PIC ON THE DRAGONS TAIL!! http://www.us129photos.com/ HE GETS A COOL POSTER OF THE SHOT IF HE WINS AND CURRENTLY HE'S GETTIN BEAT BY A TON BY A HONDA S2000! GO TO THE PAGE, BOTTOM RIGHT CORNER AND CLICK ON...

Maybe I missed it somewhere, but does Centech make an EFI harness for the Bronco like Painless does? If they don't, I hope they do soon. Something that connected to the harness from the firewall out to the bay from them would be dandy!

Hey all, We would like to invite everyone and anyone who is a Bronco nut and a facebook user, to join our page! The Mid-Atlantic Early Bronco Club has created a page whose soul purpose is just as the purpose of the club is, to keep the Bronco life alive. We're just gettin it off the ground and...

I have a set of all six lights for the front of an 04 Eddie Bauer Explorer. They are in like new condition, with no scratches or cracks. I put a set of aftermarket lights in it and have sence sold the Explorer. I also have the stock tail lights as well. Make a reasonable offer and I'll...

I won this certificate at the MEB Eastcoast Roundup this past year and will be going another route since the shipping will be around $100 to get it here. I did call them to make sure it was still valid, it has no expiration date and they told be that they would honor it. I figured someone on...

Hey all, just wanted to pass this along if anyone is interested in a nice design. I bought one off of Ebay and the guy emailed me back to tell me I was his first buyer. I thought I'd throw him a bone and let my brothers and sisters know about him. I haven't got my shirt yet since I only...