Search results

Is there a company that manufactures a shorter NP205 output shaft & housing? Or was there a OEM shorter version? I don't need the speed sensor gear. If so, how much does it reduce the OAL of the standard 12.5" NP205?

What is the maximum drivetrain OAL before driveshaft angles are too severe for highway driving and moderate off road use as measured from the bell housing face to the center of transfer case rear output yoke? Conditions - stock 302 location, stock 9" rear end & location, 2.5" suspension lift...

Today I lost reverse in the C4 with an Art Carr manual valve body. Still have the 3 forward gears. It was performing well prior to this failure with no indication of slipping or noises. The fluid level is fine. I disconnected the shift linkage, jacked up the rear axle, started the engine and...

Okay, considering converting from an auto to the ZF S5-42 manual found in an 1990 F250 4X4. This gas transmission is viewed as good manual for the Cummins 4bt applications. The S5-42 gasser will bolt up to my Ford adapter housing on the 4bt (the ZF big Block & diesel S5-47 will not) but would...

Should I pull my 3.9L 4bt rated at 105hp and governed at 2,500RPM install this Cummins 24V, Bosch VP44 high pressure common rail, HX35 wastegated turbo, 235HP, 480 ftlbs of torque and governed at 2,700 rpm?

Made a video of the build (to date)... High Pressure Jr...added the tunes.. http://www.youtube.com/watch?v=fxfdaQUfkI0 ***************************** Part 2 - Running video added 30-Aug-09 http://www.youtube.com/watch?v=3ZixadC1MJY

I've been driving the oil burner locally for the last several days since the dash install. But today, I drove the Bronco from Goose Creek, SC to Santee, SC today for a retriever club meeting, so I decided to check the mpg over this short distance after calibrating the speedometer last weekend...

Here's a few photos of the dash mods over the last 3 days which included paint, final gauge wiring, Alpine digital media head unit. In addition, my 13 year old son made a plate to cover the old fuse box location in the glove box for the Ipod connection.

Wanted (1) 17" 5 on 5.5 Rock Crawler Extreme Series 51 type steel wheel. Will consider various widths.

I'm wanting to install a stereo into the modified dash that I have out of the Bronco at the moment. Thinking about a Pioneer head unit but still researching at this time...not an extreme unit but something a little more than a basic unit on a limited budget of $600 max for the total system...

Here's a new Flat-O products adapter C4 bell housing to a small block Chevy motor. This would allow the use of a Chevy motor with a current C4 & D20. (torque converter would need to be adapted/purchased at your local torque converter shop) They are primarly used by hot rod roadster people to...

***All Sold*** '77 Bronco Parts ***Sold*** Stock height used rubber body mount set (good condition but has 1 old fender washer) $25.00 + shipping ****Sold**** Fan Shroud $30.00 + shipping ****Sold**** Charcoal Canister Good condition $5.00 + shipping All shipped from 29445

Has anyone installed Sparco Torino seats in the their Bronco? http://www.sparcousa.com/pseats_street.asp?id=195

Who's 72 Bronco? http://www.youtube.com/watch?v=8-i7lYZAdWE&feature=related http://www.youtube.com/watch?v=kBC8dBKyksE&feature=related http://www.youtube.com/watch?v=Wa4bURfTROQ&feature=related http://www.youtube.com/watch?v=4LpI8WrMtYo&feature=related

Here's some photos of modifications to my Art Carr shifter to add a backup light switch. I purchased a 2nd switch (same as the safety start park switch) and modified the bracket by bending the switch location 90 degrees and modified the tab by bending a radius to work in that plane. In...

Here are some recent photos of modifications & future thoughts for the Bronco dash. I welded patch panels in the original gauge hole and PO radio hole locations. In addition I removed & patch the ash tray/speaker grill locations. I have been driving the Cummins 4bt for a while with only a...

Here's a photo of the stable for my '77 Bronco with the 4bt. Hope to acquire the adjoining stable in the future!

Pulled the dash and rebuilt the heater box today while I had it torn down. As many have done on this site I replaced the blower fan with a Cheby type, new seals, new heater core and paint. Repaired the torn duct work with GOOP adhesive...will see how that works out. Thanks for all the tech...

Does a CS130 Alternator have the same frame mounting hole pattern as a 12SI Alternator? Or will a CS130 mount the same as a 12SI? I dont want to change my special alternator bracket... I believe the wiring connectors are different...

Just put these BFG 35x12.5x17 KM2s on the Bronco yesterday... Hope to put a few miles on them this weekend after the new radiator is installed.