Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
So we figured out the universal switch I am using needed a jumper wire from the S terminal. So we are firing and the injectors are getting fuel and pulse, but not squirting. So I have tow questions. 1. Anybody using Garry’s harness have a wiring diagram for stock ignition, or a recommended...
So the wireless OBDlink Mx+ would not connect, got my money back and bought the usb version. Playing with the software, discovered not sensing RPMs. All new to me. I will talk to Garry next week. I have an extra crank sensor may change it and make sure I am getting voltage to sensor. No spark...
See pics, one is pump end , the other is the wire coming from inertia switch that goes to power wire on the pump. Guessing it is the red wire? Also if red is positive , and black is ground, do I need to ground the black wire?
See pics. I need the adapter for the pump, gave the old one away with old pump by accident. I believe l have a saginaw end on the hose because that is the end to the pump I gave away I think. Lost, need a clue.
Info is all over the map. I have one, but need one more, see pic. I know the line is a 5/16 th inverted female flare, but don’t know the case side size. Some say 1/4 , others say 18 or 16.5 mm
Looking for a clean way to get over to starter relay because I plan on leaving it on pass. side. I am looking to make room for my Efi AirPod on passenger side, battery is in the way.
I have to wire up something for starting, figured key ,starter relay, couple gaugers. This is a stock explorer with ford fuel injection. After initial start up will be relying on a tablet with wireless OBD2 dongle, but have to crank it first.
WH/Hydratech (same?) on explorer efi, doable? I did not find a definitive answer. here is the link to the system https://www.wildhorses4x4.com/product/Hydroboost-Power-Brake-System-B/Bronco_Power_Brakes. I am currently fitting radiator, fan, etc. and only lack the hydro unit fitment, thinking i...
Looking at this lengthy thread, https://classicbroncos.com/forums/threads/heat-torture-cooling-system-test-exploder-mech-vrs-tauras-electric-fans.256487/ , and the importance of the water pump is mentioned. So what water pump is the better, preferred pump? Also, I am going to run a stock...
I have explorer rear disc with Lokar cable kit, http://tinyurl.com/Lokarcables . i have eliminated the foot brake and will have a hand brake berween seats. Has anyone else done this and if so, what handbrake did you use.The lokar and geniie are 200 bucks. undecide on spending that much yet...
Resolved to make time for my project this year. currently working on getting it to exhaust shop for exhaust system. Plan is to pull body again after that and finish running gear. Already completed, engine rebuild, 4r70 rebuild, Dana 20 rebuild , new rear end housing with disc, used carrier and...