Search results

https://www.fourwheeler.com/news/features/1968-ford-bronco-half-cab-koh/ One of the editors from fourwheeler, super cool dude, chased us down out at King of the Hammers and asked if we could do a small photo shoot of my bronco.

Friend of mine want to go full width and found 8 lug d44 axles are more plentiful than 5 lug. Does anyone know if the spindles snout is the same on both an 8 lug and 5 lug? He knows he will need to buy new 5 lug hubs but needs correct spinle so the caliper brackets(aftermarket wilwood) will...

I have a 25 yr old set of brand new fenderwell headers. Installed for test fit then removed. They do have some surface rust in a couple spots from age and sitting around by the beach in a garage. I will have them at fabulous Ford's in the parking lot. Need to get rid of them but do not want to...

So I recently bought a race truck with a pissed off 408 that I believe got built without the dowel sleeves installed for the timing cover. When my buddy put the motor in this thing before I bought it, he had to "shift" the front motor plate which is between the timing cover and water pump to get...

Tried to get there website now for 3 days and it won't load. Even a Google search results nothing's. Did they close down?

Like the tittle says, I am looking to install a new box preferably 3.1 quick ratio with hyd assist. Problem is, all the boxes I have seen have the ports to the outside, right where I have noultiple engine cage tubes meeting the frame. There is nothing in the way on the engine side of the box...

So I had my eb sitting at perfect ride height, but then I charge all 4 4 front shocks and it raised 1.5 inches and I can't lower it because the coil adjuster is up as high as it will go. I'm running 250 over 30 coils now. Anyone have experience in changing springs in 50 pound increments and...

Anyone know off the top of their head what tooth count is for 4.88s with 35 in tires? Current gear is a 16 and when I'm going right around 60 is says I'm doing 80. I think I need a 20 or 21 per wild horses percent formula.

Recently installed a thermostatic switch to complete the ground for my electric fan relays. I installed it at the rear of the intake manifold. Pretty much all the way at the back. Having issues with the temp the fans are coming on and believe the switch is faulty, but wanted to make sure the...

So I have new Chevy disc conversion spindles and new hubs with rotors. I can't use any of it. I bought a wilwood disc kit that uses drum brake d44 spindles and hubs which I need. Willing to trade old stuff for my new stuff if anyone is interested.

Long story short I have new d44 chevy disc spindles and hubs with rotors that are brand new and I can not use. I bought a wilwood disc kit and it uses the stock drum brake d44 spindle and hub which I don't have. I will trade my new spindles hubs and rotors for used stuff if some one is interested.

Bought a Canton remote oil filter adaptor for the engine and a dual filter head to mount elsewhere under the truck. My question is, what size hose should I run. Both parts have 1/2in female pipe threads. I bought 1/2 to 8an adaptor and 8an hose ends and I didn't realize the ID of 8 an hose ends...

Like stated, these are new. I installed them and had issues with shock clearance. I did run the engine just to hear them. The have a little surface rust from being by the beach even though indoors. They are hi temp coated. ill try and dig up some pics.

so ive been reading about some 90s year of dodge rotors that will "slip" over the d44 front hubs. basically you can change rotors without a hub disassembly. and i heard they were larger diameter. im sure the caliper wont line up but im making caliper brackets anyway. reason i ask is if they are...

after searching and calling hooker, i have found no one makes fenderwell headers any more for eb aplication. closest found was fenderwell headers for a early jeep from advanced adaptors. they actually look close from some pics i saw. any one know if they will fit or if they are close...

came across a d44 low pinion in a junkyard that the guy said was stock. did ford make a 4x4 from the factory? reason i ask is the radius arms are totally different looking and made from bent plate not cast like ours. 2nd question is, it is 8 lug with dual piston calipers. i want to keep 5 lug...

getting all my parts for my new rear axle and im not sure which calipers to run. the place i got the housing,hubs and rotors recomended the superlight calipers. when looking on summits site, the superlights seem to all have 1.250 pistons. then i looked at the dynalites. they are a little...

got a schreiner racing full floater today from 9infloater.com. very happy with the craftmanship. i only went with 31 spline axles due to hubs being alot cheaper. everything looks very good and very strong. price was nice as well. currie or anyone else couldnt even touch them. ;D...

meand a buddy ordered aset of keith black pistions forhis 71 mustang. the guy at summit ,i thought, was sending us domed pistion. the domed psitons say they are replacements for boss r code, which sounded good to us. the psitons he got are flat top, kb177 part number, and we are a little...

tried searching and found nothing. i lost my rear axle vent and need to know what thread size it is, i think its straight thread, its not 1/8 or 1/4 fpt.