Search results

What is the real benefit of the Sasquatch package on the BL/WT? It says “high clearance suspension” which adds 10mm lift (3/8”). What is different suspension wise? Unfortunately you can’t add the bead lock capable wheels and 315 tires without the Sasquatch. I doubt 3/8” more height make a...

Patina’d long Tube Headers headers off a ‘69 bronco with 302. Surface rust, unknown manufacturer Rob 541-992-2fourthree4

I posted in “parts wanted” but somebody might know of a worthless frame laying around. I just need the passenger front section to just behind the cross member (24” +-). I though I saw a vender selling these, but can’t find a long enough section

Looking for the passenger front frame horn. Only need about 24” from the front just beyond the cross member. Complete frame would be fine. Contact Rob 541-992-2434

So, this C6 has seen some abuse. Many of you have seen the you tube videos of my bronco pulling full size trucks out of the mud and broncos out of the snow. The rest of the time it is bombing the dunes with very little pavement miles. The original build (427stroker/C6) had about 6k mikes in it...

The new ProFlow4 set up is working great on the 427stroker. However the input shaft on the C6 wasn’t up to the task. I believe it was a hardened PA or TCI. Does anybody know what the latest and greatest is! Looks like most are 300m but can’t find major differences other then price. Let me know

Some of you know I just completed a Pro-Flo4 EFI swap on my 427 stroker. I think mainly because I was bored and wanted a more classic look than anything. The Victor EFI system worked Phenomenally. Trick flow fuel rails, 42 pound injectors, MSD electronics, Accu fab throttlebody etc. etc. Pretty...

Some of you know I just completed a Pro-Flo4 EFI swap on my 427 stroker. I think mainly because I was bored and wanted a more classic look than anything. The Victor EFI system worked Phenomenally. I had Gary, the EFI guy, live tune with his quarter horse software which is included in the kit...

Those of you that have been around a while might remember the yellow “S”uperman bronco that mountainview68 built 12 years ago. Some of you also know that Chad is a great friend and I purchased that bronco from him several years ago. After 12 years and 6k babied miles (haha) I’ve decided tear it...

As some of you know, I’m puttering with a ‘70 Bronco just to keep me busy. I have plenty of time on my hands and a fair bit of skills. I could afford to restore it which isn’t out if the question, but really I just want to make a nice driver for somebody down the road. I’ve gutted the interior...

So I’m one of the original enthusiasts that just loves working on and driving EB’s. I never saw them as an investment, cutting up a couple Rangers over the years. I was recently diagnosed with stage 4 lung cancer and pretty much had to kiss my custom home building career goodbye. So I picked...

Looking for: Good hood Factory front and rear seat belts. Spare tire attachment pcs. I have the swing/brackets. Fan shroud T shift indicator/cover Ashtray/glovebox door (trade for bitchen chrome ones) Factory front turn signals ‘70

Best I can tell the PO went through great lengths to install a 1965 to 69 Thunderbird power steering box. It actually fits quite well tucked inside the frame rail. I haven’t counted the turns but believe it’s around 2 1/2. There’s quite a bit of fluid coming from somewhere so if it comes down...

2 complete sets of 4pt harness (4 passengers). A little surface rust on the buckles, otherwise great. $100 OBO

Factory steel hood. Typical cracks and rust in the front lip. Good for crawler or pieces. All hardware attached. Best offer

I just picked up a 1970 sport. Unfortunately and expectedly the wiring has seen better days. Trying to trace down this red wire with yellow stripe that appears to be molded into the same socket as the green wire with red stripe which I believe is the ignition trigger. The previous owner wired in...

A recent post makes me question how accurate the Marti report is. I have one for my ‘77 and realize they are vin specific, but somewhat generic and some reports seem to be more detailed then others. With mid year model changes, does the report specify dash pad change, mirror change, vacuum vs...

So, I’ve owned several EB’s over the past 25 years. From uncut to full on crawler doing all of my own work. Engine, suspension, interior, body and paint. I purchased a ‘77 a few years ago, right before the market took off. It’s pretty clean and very reliable. I drove it 500 miles home and...

As some of you know, I’ve been trying to figure out what color my ‘77 is. I can’t find anything that is a match with in reason considering fading etc. Obviously we have heard of special decor which there have been many threads and polls. But how many of you have seen “special paint” and...

The plaques and Marty report are blank since it was a special order from the factory. It's not Viesta or Poppy. Any ideas? Most of the paint is original.