• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Captain Crunch 2.0

OP
OP
Bitch'nBronco

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,380
Loc.
Havre De Grace, MD
Took it for a spin before this afternoon, first time with the wife and kids in the Bronco since I put the long arms on... you definitely notice the body roll around corners with some weight in the cabin
 

Attachments

  • 20240330_140431.jpg
    20240330_140431.jpg
    278 KB · Views: 29
OP
OP
Bitch'nBronco

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,380
Loc.
Havre De Grace, MD
Took the Bronco for a cruise with my boys and my Dad yesterday, and today my KC harness came in so I started wiring them in. Can't have KC Daylighters without the stainless loom lol
 

Attachments

  • 20240406_114136.jpg
    20240406_114136.jpg
    160.7 KB · Views: 33
  • 20240406_114210.jpg
    20240406_114210.jpg
    144.9 KB · Views: 33
  • 20240405_104654.jpg
    20240405_104654.jpg
    360.6 KB · Views: 33
OP
OP
Bitch'nBronco

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,380
Loc.
Havre De Grace, MD
Finished wiring them in, man are these bright. I need to adjust the mounting tabs to get the beams where I want them. They were aimed about 15ft in front of the Bronco lol. Also noticed it's harmonic balancer time, it looks like it's about to separate and the engine was vibrating a good bit.
 

Attachments

  • 20240413_201515.jpg
    20240413_201515.jpg
    101.1 KB · Views: 10

.94 OR

Contributor
Bronco Guru
Joined
Jul 5, 2009
Messages
1,729
Isn't the bolt hole in the bottom of the light slotted to allow for up/down adjustments?
Back the nut off a bit and see if you can rotate the light up a bit.
 
OP
OP
Bitch'nBronco

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,380
Loc.
Havre De Grace, MD
Small project today, got some turn signal indicators and mounted them to the steering column cover. They're threaded on the back side, just need to open the screw holes up a bit so I can mount them.
 

Attachments

  • 20240421_121828.jpg
    20240421_121828.jpg
    71.4 KB · Views: 14
  • 17137165148835613105038888690485.jpg
    17137165148835613105038888690485.jpg
    145.6 KB · Views: 14

LilMixedUp

Full Member
Joined
Feb 27, 2016
Messages
163
Loc.
Bonaire
as for the front shock hoop.... I currently have a Sexton hoop w/Blistiens, and Dull long arms with both shocks mounted rear of tire. like you have found the ride and handling is much improved. Its going on 12-14 years so like you I'm thinking of changing to new springs and shocks. Talked with the guys at Duff and Lick Creek this weekend at SuperCel about their new 20/20 shocks. And nothing but good stuff from everyone. PLUS they recommend getting away from the duals unless you just "want" the extra cost.... just something to think about before adding hoops... if you need longer travel then the single extended mount would be cheaper.
 
OP
OP
Bitch'nBronco

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,380
Loc.
Havre De Grace, MD
as for the front shock hoop.... I currently have a Sexton hoop w/Blistiens, and Dull long arms with both shocks mounted rear of tire. like you have found the ride and handling is much improved. Its going on 12-14 years so like you I'm thinking of changing to new springs and shocks. Talked with the guys at Duff and Lick Creek this weekend at SuperCel about their new 20/20 shocks. And nothing but good stuff from everyone. PLUS they recommend getting away from the duals unless you just "want" the extra cost.... just something to think about before adding hoops... if you need longer travel then the single extended mount would be cheaper.
Now that I have a few more miles on the setup I don't feel like I need the hoops. The only time the body roll is overly noticable is when i have all 4 seats full. I halfway want to add them for looks, but probably wont do it. Appreciate the insight
 
OP
OP
Bitch'nBronco

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,380
Loc.
Havre De Grace, MD
More progress today, swapped out the brake booster and master cylinder (need a flare adapter to finish the job), installed some turnbuckles to reinforce the top of the windshield and started replacing my harmonic balancer.
 

Attachments

  • 20240503_142640.jpg
    20240503_142640.jpg
    156.7 KB · Views: 12
  • 20240503_142658.jpg
    20240503_142658.jpg
    88.7 KB · Views: 12
  • 20240503_142705.jpg
    20240503_142705.jpg
    158.1 KB · Views: 13
Top