Recent content by Wzbell

Hows the 69?

I had a kayline from the old design. So old Kayline had to get back to me with questions I had about it. I held up well, no complaints at all.

no sure if they make thyese for EBs or not but has anyone used or know anything about the new pads they are making? The ones that are supposed to be lined. Parts stores says within the first 50 miles they mate to the rotors. Do you have to turn the rotors when you put them in?

mine says 50wt oil. That's what I used. Only could find it in a silver Valvoline bottle. Course if you used gear oil you could always tell if it starts leaking from the smell.

Any combatible donor cars I can get a power steering setup from with no mods?

Does everyone have interior door handles that rattle? Is there anything you can do to fix them?

What could be the problem with an EB that after the engine warms up it sputters and stalls at high speeds?

I beleive I know the EB. Hope it is serving you well. First I would go ahead and register so peeps would get to know your name. With the door I would pull the locks out or look in there to see if what happened really broke the locls or just a rod. Jeff's Bronco graveyard has rods for 5...

so it's just regular motor oil? not in one of those bottles with the filling tip? Smelling that gear oil for a day is making me sick on my stomach!! also, anyone replaced the output seal? The replacement doesn't look exactly like to old one. It's missing the inner spring ring. Does this...

what type fluid do I use in the transfer case? I read 50wt but I can't find anything but 75 and about. And is it regullar gear oil that smells like s@&$t.

think i can take the o ring up to the advance auto and they'll have one? or will i have to order one?

what size is the nut?

First what could be wrong if my transfer case if leaking fluid around the front output shaft nut? and 2nd what size is that nut? Got to be over 1inch?

Is a dana 20 and a spicer 20 the same transfer case? If not do the front output seals match? Anyone give me any tips on replacing the front output seal with the case still in the EB?

I notcied today that the previous owner of my '69 had wedged a sheetrock anchor around the door locl post. I assume to hold it up. I pushed the rod down and the door got stuck locked. I've pulled it back up, tried the key to unlock it with no luck. I took the inside door panel and messed...