Recent content by Mar1ne

Great. Thank you

I'm looking for the grommet that goes in the driver side wheel well area for the 4 vapor lines that come in/out. I don't know of this being made aftermarket. I'm hoping to find one in good/ perfect shape that can be cleaned up.

Bad coil pack and cracked porcelain on one plug. I’m on the road finally after the 3.5 year build. Thank you to everyone who weighed in on this or looked to see if they could help.

troubleshooting again this morning. Checked resistance on the plug wires, all good. Test drive after switching them around, although I didn't expect any change. What I did notice was while getting on the gas, bringing it up to around 4k rpm on a hard acceleration while the symptoms of popping...

I explicitly stated to the machinist to keep the same cam in the motor. When I picked it up the two elderly gentleman told me they wanted to put a mustang cam in it against my wishes. I reiterated why I wanted the stock cam and they said they left it alone. As with a lot of machine shops I hear...

I changed out the TPS the other day, no change. I haven't gone to a pick and pull yet as we just don't have one very close. I do want to change out the coil packs though.

Ok, good. Same configuration.

Is this the correct way to attach plug wires?

Local ford dealer said 1996 was too old for them to mess with. I still need to check fuel pressure while driving. I'm waiting for a return call from a local shop. The owner/mechanic is an off road guy and I was told the best around at diagnosing problems. I want to see what he says before I...

Just a few miles down the road. I'll contact them tuesday when the service department opens and see what they can do.

Yes. There is an IAC. I cleaned it and the spring/ plunger appeared to function properly.

I won't 100% rule out fuel, but I know my tank/pump/lines up to the rail are good. There shouldn't be a problem with the rail itself. Regulator is good. Injectors are clean. I connected them to a 9volt and ran brake cleaner through them and they all sprayed evenly, so I'm assuming thats ok. I...

Rebuilt/ cleaned the injectors. No change. Put the WH stainless fuel tank with in tank pump. No change. Switched the O2 sensors around. No change. I need to double check the fuel pressure while driving. The shop I had troubleshoot it supposedly did and said it was good at WOT. I will check...

Still chasing this, but work has me busy most days. Thanks again for helping me out!